31H-10 Maytag Range - Parts

Flat Style Oven Igniter Kit

★★★★★

★★★★★

(68)

The flat style oven igniter kit is used in gas ovens and ranges. It is what provides the heat needed to open the gas valve, and it ignites fuel for the burner assembly. This part can be used for both ... Add to cart

Oven Door Spring

★★★★★

★★★★★

(4)

The oven door springs create tension which allows the door to open and close with ease. This spring can be used on either the left or right side of your oven, is made completely of metal, and is appro... Add to cart

Double Burner Assembly This double burner design is not to be used with sealed burner style models.

GRATE BURNER

★★★★★

★★★★★

(2)

This square burner grate has sides measuring approximately nine inches. It is all black in color.

Safety Valve - just over four inches long This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range. This safety valve has an amperage range of 3.3 to 3.6 amps. The valv...

Surface Burners Spark Module Kit This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Handle This handle does not come with end caps. It is used to easily open or close the oven door or drawer.

Hinge - Left Side The hinges allow the door to swing up and down. The hinges must be properly adjusted in order for the door to close properly.

Hinge - Right Side The hinges allow the door to swing up and down. The hinges must be properly adjusted in order for the door to close properly.

Oven Rack

★★★★★

★★★★★

(1)

This oven rack is twenty-two inches long, and is made of metal.

Knob Kit - Six (6) Pieces Contains four (4) burner knobs and one (1) each of long and short shaft thermostat knobs.

SEAL