EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

31FS-7W Magic Chef Range - Instructions

All Instructions for the 31FS-7W
46 - 58 of 58

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven light Switch
  • William from APACHE JUNCTION, AZ
  • Really Easy
  • Less than 15 mins
  • Pliers
Compressed the springs and removed the damaged switch, then changed the wiring over to the new switch and press into place, worked fine.
Was this helpful?
Thank you for voting!
Oven knob was broken & stove was old
  • Janice from Springfield, MO
  • Really Easy
  • Less than 15 mins
Pushed the knob on to the part that was sticking out. Knob fit perfectly...had to use a substitute part & wasn't sure it was the right part, so was pleasantly surprised!
Was this helpful?
Thank you for voting!
Numbers Were Wore Off Of The Old Knob So Couldn't Tell What Temp The Oven Was On
  • Eleanor from Flat Rock, MI
  • Really Easy
  • Less than 15 mins
Removed old knob and took new knob out of package and just slipped it on the stove. Less than a minute.
Was this helpful?
Thank you for voting!
Thermostat Knob broke
  • James from Tallahassee, FL
  • Really Easy
  • Less than 15 mins
I couldn't find my model number U31EA-7 so I decided to go with a deferent model number U31FA-7 Pulled the old Knob off and pushed the new knob on and it works great
Was this helpful?
Thank you for voting!
Light bulb failure
  • Grant from Alexandria, VA
  • Really Easy
  • Less than 15 mins
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Was this helpful?
Thank you for voting!
Broken Door Spring
  • Matthew from Chippewa Falls, WI
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Slid oven out from counters. On each side there are 3 screws on the front and three screws on the back holding the side piece on. Once off, the spring was very easy to get at and replace. I had only one broken, but replaced both anyways. I think it took longer to clean the sides of the oven that haven't been touched in years than to r eplace the springs. This job was very simple and easy.
Was this helpful?
Thank you for voting!
Right-side oven door spring broken
  • Ted from Horseshoe Bend, AR
  • Easy
  • 30 - 60 mins
  • Screw drivers
Range is a 1967 model Maytag. First I removed drawer under oven, unplugged the range and pulled it out from the wall. Removed oven door by positioning it in the partly-open detent position, then pulled up to remove the door. Next I removed 7 screws per side panel: 3 in front and 3 in back, and one on top under cooktop, which retains the c ooktop hold-down clip. With side panels removed, I noted the oven door spring position on the intact left side, then replaced the right-side spring first using the same spring adjustment positions. As I replaced the spring, I applied lithium grease to the spring hook pivot points as well as the spring coils where they rub against the interior wall. I repeated the process on the left side. I reassembled the side panels, oiled the door hinges and reinstalled the oven door. Reinstalled range and bottom drawer. The oven door operates like new, and the new springs are totally quiet — good for another 47 years!
Was this helpful?
Thank you for voting!
All Instructions for the 31FS-7W
46 - 58 of 58