EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

31AS3 Snow Blower - Parts

25 - 36 of 499

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lawn Mower Carriage Bolt – Part Number: 710-0260A
$6.65
In Stock
Lawn Mower Carriage Bolt
Part #710-0260A
This genuine OEM carriage bolt is used to secure various parts in lawn and garden outdoor equipment. The bolt has a round head with a square area underneath it that prevents the bolt from turning and coming loose when it is installed. The bolt shaft has a diameter of 5/16 inches, with 18 threads per inch and the threaded portion of the bolt is 0.62 inches long. If the bolt is corroded, the threads are worn down, or the head is damaged or deformed, you will need to replace the bolt to keep your equipment parts secured and functioning efficiently. To replace the bolt, first remove the nut using a wrench or socket. Once the nut is removed, you can unthread the bolt. Insert the new bolt in position, thread the nut on and use a wrench to tighten it. Be careful not to overtighten the bolt to avoid damaging it or stripping the threads. This carriage bolt is sold individually.
Snow Blower Key Switch – Part Number: 951-10637
$20.39
In Stock
Snow Blower Key Switch
Part #951-10637
Snow Blower Spacer – Part Number: 731-04870
$7.27
In Stock
Snow Blower Spacer
Part #731-04870
This item is available as an individual replacement part that has been OEM sourced to be used with snowthrowers from Craftsman. The metal spacer is part of the auger assembly and it is used to separate the auger blades. This item is available as an individual replacement part.
Fitting-grease – Part Number: 937-3000
$7.25
In Stock
Fitting-grease
Part #937-3000
This is a genuine OEM lube fitting part made for use with various outdoor lawn equipment models and measures 3/16-inch wide. Sold as an individual part, this grease/lube fitting is made of metal and is used to deliver lubrication to whatever it is attached to for better performance, through a small passage in the fitting. If your lube fitting needs to be replaced, it may require pliers and a hex wrench for that process. Check your user manual or any diagrams to make sure this is the correct part for your equipment.
Snow Blower Recoil Starter Assembly – Part Number: 951-14151
$109.07
In Stock
Snow Blower Recoil Starter Assembly
Part #951-14151
A frayed pull cord, loose handle, or rope that stays extended can make a small engine hard to start. A complete recoil starter replaces the housing, pulley, spring, rope, and grip as one unit. First check that the engine turns freely and that the starter cup is not bent or worn. Match the assembly to the full engine model, type, and code. Remove the spark plug wire and allow hot parts to cool before service. Install every fastener securely, keep the rope clear of sharp edges, and test the rewind action slowly before starting the machine.
Snow Blower Fuel Drain Plug – Part Number: 710-04938
$6.55
In Stock
Snow Blower Fuel Drain Plug
Part #710-04938
Fuel Drain Bolt – Part Number: 710-04945
$6.55
In Stock
Fuel Drain Bolt
Part #710-04945
This mounting bolt seals the fuel system and keeps the fuel bolt securely attached to the carburetor in a variety of gas-powered outdoor equipment. It is a genuine OEM part made of metal with dimensions of 0.25-20 x 0.875 inches. If you notice that the bolt is corroded or rusted, it will need to be replaced. A faulty or loose mounting bolt may cause fuel to leak, make it difficult to start or run your equipment engine, and may allow contaminants to enter the engine. The bolt is easy to install using a wrench or socket. Be careful not to overtighten the bolt as this may damage the fuel bowl. Each item is sold individually.
Bail-drive – Part Number: 747-1214
$36.17
In Stock
Bail-drive
Part #747-1214
The drive control connects to the upper handle and is made of metal. This item is available as an individual replacement part. It is an OEM from MTD, Yard Machines, Troy-Bilt, Bolens, Yard Man, and Cub Cadet for use in lawn mowers. If this part becomes broken it will need to be replaced and may require a screwdriver and a socket set during the installation.
Key-hi-pro – Part Number: 914-0161
$6.83
In Stock
Key-hi-pro
Part #914-0161
This authentic OEM hi-pro key, also called a woodruff key or key stock, is a metal component found in your lawn equipment that connects rotating parts. It is 3/16 inch wide and 5/8 inch long. It fits into a specially-shaped slot on a shaft and prevents the parts from moving or slipping out of position while your machine is running. To find and replace a hi-pro key on your machine, check your user guide for instructions. When removing the hi-pro key, insert a flathead screwdriver or needle-nose pliers into its groove and pry it out of its slot. Please bear in mind that this hi-pro key is sold individually.
Primer – Part Number: 951-10639B
$24.79
On Order
Primer
Part #951-10639B
Ensure reliable cold-weather starts with this genuine OEM primer bulb, designed specifically for use with Yard Machines and MTD snowblowers. Unlike aftermarket alternatives, this high-quality part is sourced directly from the original manufacturer, guaranteeing a perfect fit and dependable performance. The primer bulb plays a crucial role by forcing fuel into the carburetor, making it easier to start your engine—especially in colder conditions. Over time, the rubber material can lose elasticity or develop cracks, which can affect performance and require replacement. This durable rubber primer bulb is built to withstand regular use and is sold individually. Replacing a worn primer bulb is a simple and effective way to keep your snowblower running smoothly all season long.
Fitting-dual Cable – Part Number: 731-04216A
$17.61
In Stock
Fitting-dual Cable
Part #731-04216A
It is a genuine part that is supplied by the original equipment manufacturer for use with snowthrowers. This special dual cable fitting helps to secure the control cables on the handle. It is a high-quality replacement for a damaged or a missing component that was installed on a new unit. One durable plastic fitting is included. To ensure the exact location and the correct application of this part, refer to the appropriate diagrams for your model. It is secured to the handle by a screw which is sold separately. Note, a screwdriver will be needed to perform this repair.
Choke Knob – Part Number: 951-11284
No Longer Available
Choke Knob
Part #951-11284
This choke knob is an authentic OEM replacement part designed for snowblowers. It is a small plastic knob, measuring 2 inches in diameter. It restricts the airflow to the engine which enriches the fuel mixture and makes it easier to start the snowblower when the engine is cold. Depending on your exact model you can find the choke knob either near the engine or on the control panel. Failure of the choke knob can occur due to wear, damage, or clogging. If the choke knob is damaged or worn down, you will have difficulties starting your snowblower, the engine may stall, and you will notice decreased performance from the snowblower. To remove the faulty choke knob, remove the clips or screws that hold it in place, and pull it off the shaft. Align the new choke knob with the shaft and secure it in place with the fasteners. Run your equipment and test the new choke knob to confirm that the choke can engage and disengage appropriately.
25 - 36 of 499