EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

31AS2N Snow Blower - Parts

13 - 24 of 286

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Spiral Crescent – Part Number: 735-04032
$26.33
On Order
Spiral Crescent
Part #735-04032
This is a Genuine OEM Approved replacement part designed for use with Snow Throwers. This part is made out of Rubber and it is Sold Individually. This part mounts with 2 Screws (Sold Separately) at each end. You would need a Wrench to replace this part • Remove the ignition key • Disconnect spark plug • Tilt Snowblower back so it rests on it's handles for support • Remove all 4 bolts on the auger paddle and then remove the paddle • Install the new auger paddle into the bracket on the auger shaft • Make sure that the auger paddles are secure
Washer-lock 5/16 – Part Number: 936-0119
$6.57
In Stock
Washer-lock 5/16
Part #936-0119
This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual
Snow Blower Choke Push Rod – Part Number: 951-10640
$16.00
In Stock
Snow Blower Choke Push Rod
Part #951-10640
This part is an OEM from MTD for use with Snow Blowers and Engines. The Choke push rod connects the choke thermostat lever to the carburetor choke plate lever to control airflow through the carburetor during engine start-up. The most common reason for replacing the choke link is if the engine will not run smoothly or will not start at all. This part is sold individually. The tools that you will need to replace the choke push rod is a 5/16 inch socket or nut driver.
Snow Blower Key Switch – Part Number: 951-10637
$20.39
In Stock
Snow Blower Key Switch
Part #951-10637
Screw-hex Tap 1/4 – Part Number: 710-0895
$8.93
In Stock
Screw-hex Tap 1/4
Part #710-0895
This is a genuine replacement part manufactured for use with lawn and garden power equipment. This versatile screw has a flanged hex head and can be used in a variety of applications. The screw is available as an individual replacement part, please see model diagram for part location and usage.
Wiong Nut – Part Number: 720-0279
$7.04
In Stock
Wiong Nut
Part #720-0279
This is a type of handle with a knob-shaped grip used in a variety of lawn and garden tools with adjustable features. This genuine OEM part is 0.8 x 0.2 x 1 inches and is made from plastic. It is designed to connect and disconnect individual parts together without using any tools. By loosening the knob, you can easily adjust the height of the handles on your equipment to your liking as well as fold the handles for proper storage. Over time the handle knob can wear down or break. If this happens, you will need to unscrew the knob and remove the old rope guide before you can place the new knob on. Place the new rope guide in position, thread the eye of the cable through the eye hook loop and finally thread the new knob on to the shaft and turn it clockwise with your hands until it is secure.
Snow Blower Recoil Starter Assembly – Part Number: 951-14151
$109.07
In Stock
Snow Blower Recoil Starter Assembly
Part #951-14151
A frayed pull cord, loose handle, or rope that stays extended can make a small engine hard to start. A complete recoil starter replaces the housing, pulley, spring, rope, and grip as one unit. First check that the engine turns freely and that the starter cup is not bent or worn. Match the assembly to the full engine model, type, and code. Remove the spark plug wire and allow hot parts to cool before service. Install every fastener securely, keep the rope clear of sharp edges, and test the rewind action slowly before starting the machine.
Snow Blower Auger Assembly – Part Number: 984-04253-0637
No Longer Available
Snow Blower Auger Assembly
★★★★★
★★★★★
(3)
Part #984-04253-0637
This is an authentic OEM part for use with MTD, Troy-Bilt, Yard-Man and Yard Machines Snowblowers. The auger consists of rotating blades that collect snow and propel it through the auger housing and out the chute. The most common reason for replacing the auger assembly is if the snowblower isn't throwing snow like it should and the blades look worn out. This part is sold individually. The tools that you will need to replace the auger assembly is a 1/2" socket, 3/8" socket, 7/8" socket and a 9/16" socket.
Snow Blower Fuel Drain Plug – Part Number: 710-04938
$6.55
In Stock
Snow Blower Fuel Drain Plug
Part #710-04938
Fuel Drain Bolt – Part Number: 710-04945
$6.55
In Stock
Fuel Drain Bolt
Part #710-04945
This mounting bolt seals the fuel system and keeps the fuel bolt securely attached to the carburetor in a variety of gas-powered outdoor equipment. It is a genuine OEM part made of metal with dimensions of 0.25-20 x 0.875 inches. If you notice that the bolt is corroded or rusted, it will need to be replaced. A faulty or loose mounting bolt may cause fuel to leak, make it difficult to start or run your equipment engine, and may allow contaminants to enter the engine. The bolt is easy to install using a wrench or socket. Be careful not to overtighten the bolt as this may damage the fuel bowl. Each item is sold individually.
Rubber Paddle – Part Number: 735-04033
$12.36
In Stock
Rubber Paddle
Part #735-04033
Primer – Part Number: 951-10639B
$24.79
On Order
Primer
Part #951-10639B
Ensure reliable cold-weather starts with this genuine OEM primer bulb, designed specifically for use with Yard Machines and MTD snowblowers. Unlike aftermarket alternatives, this high-quality part is sourced directly from the original manufacturer, guaranteeing a perfect fit and dependable performance. The primer bulb plays a crucial role by forcing fuel into the carburetor, making it easier to start your engine—especially in colder conditions. Over time, the rubber material can lose elasticity or develop cracks, which can affect performance and require replacement. This durable rubber primer bulb is built to withstand regular use and is sold individually. Replacing a worn primer bulb is a simple and effective way to keep your snowblower running smoothly all season long.
13 - 24 of 286