EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

31AM3 MTD Snow Blower - Parts

13 - 24 of 264

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Snow Blower Nipple Fuel Tank – Part Number: 951-10651
$25.04
In Stock
Snow Blower Nipple Fuel Tank
Part #951-10651
The fuel tank nipple, also referred to as a fitting, connects the fuel tank of your lawn equipment to its engine fuel line, allowing fuel to reach the engine. If you observe fuel leaks or a loose connection, the nipple may be damaged and requires replacement. When removing the old fuel tank nipple, ensure the tank is empty and the engine is turned off. Use a wrench or pliers to detach the nipple. This high-quality OEM replacement part is sold individually.
Wsh, Bell., .34 x .872 x .06 – Part Number: 736-0242
$6.74
In Stock
Wsh, Bell., .34 x .872 x .06
Part #736-0242
Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft. If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damaged, it will need to be replaced. Refer to your owners manual to determine the exact location of this part. Customers rate the difficulty of this repair as Medium.
Snow Blower Star Knob – Part Number: 720-04072A
$10.88
In Stock
Snow Blower Star Knob
Part #720-04072A
This Star Knob, which may also be simply referred to as a Knob, is sourced directly from the manufacturer for use in lawn mowers and snow blowers. This part provides a quick-release for handles to fold down, and connect upper and lower handles. It is made of metal, is black, is not part of a kit or assembly, and is sold individually. This part will need to be replaced if it has become cracked, worn, or damaged. The most common cause for this part needing to be replaced is worn or stripped threads no longer being able to grip. You will need a wrench or socket set and a torque wrench to complete this repair. It should be torqued to the manufacturer's recommendation. Customers rate this repair as Easy.
Bracket - Choke Co – Part Number: 951-11112
$36.50
In Stock
Bracket - Choke Co
Part #951-11112
A choke control bracket is designed to mount a choke lever/knob, allowing you to open or close the choke whenever necessary. This bracket is designed for use with snowblowers and is made of high-quality metal and features a built-in choke lever and connects to a push rod which actuates the choke on the carburetor. If you find that you have little-to-no control over the choke, or that the choke engages and/or disengages at random, this bracket may be damaged or worn and need to be replaced. To replace this bracket, you will need a screwdriver and wrench to access the inside of the carburetor housing, disconnect and replace the bracket, and reassemble the entire housing. This bracket is sold as an individual and is a genuine OEM part.
Snow Blower Extension Spring – Part Number: 932-0611
$10.63
In Stock
Snow Blower Extension Spring
Part #932-0611
An extension spring is designed to add tension and resistance to different components throughout lawn and garden equipment. This extension spring, also known as an idler spring, is designed for use with the auger within different makes of various lawn and garden equipment like lawnmowers and snowblowers. This spring is approximately 2.5-inches long when completely wound and is made of high-quality metal. If you notice that the lever that connects to the auger is loose or has significantly less tension than normal, this spring could be broken or have lost its level of tension, meaning it needs replacing. To replace this spring, you may need a set of pliers, but you simply remove the frame cover over the spring, pull it away from the auger, and carefully pull it off. Then, simply replace that old spring with the new spring.
Snow Blower Choke Push Rod – Part Number: 951-10640
$16.00
In Stock
Snow Blower Choke Push Rod
Part #951-10640
This part is an OEM from MTD for use with Snow Blowers and Engines. The Choke push rod connects the choke thermostat lever to the carburetor choke plate lever to control airflow through the carburetor during engine start-up. The most common reason for replacing the choke link is if the engine will not run smoothly or will not start at all. This part is sold individually. The tools that you will need to replace the choke push rod is a 5/16 inch socket or nut driver.
Lawn Mower Carriage Bolt – Part Number: 710-0260A
$6.65
In Stock
Lawn Mower Carriage Bolt
Part #710-0260A
This genuine OEM carriage bolt is used to secure various parts in lawn and garden outdoor equipment. The bolt has a round head with a square area underneath it that prevents the bolt from turning and coming loose when it is installed. The bolt shaft has a diameter of 5/16 inches, with 18 threads per inch and the threaded portion of the bolt is 0.62 inches long. If the bolt is corroded, the threads are worn down, or the head is damaged or deformed, you will need to replace the bolt to keep your equipment parts secured and functioning efficiently. To replace the bolt, first remove the nut using a wrench or socket. Once the nut is removed, you can unthread the bolt. Insert the new bolt in position, thread the nut on and use a wrench to tighten it. Be careful not to overtighten the bolt to avoid damaging it or stripping the threads. This carriage bolt is sold individually.
Snow Blower Key Switch – Part Number: 951-10637
$20.39
In Stock
Snow Blower Key Switch
Part #951-10637
Snow Blower Spacer – Part Number: 731-04870
$7.27
In Stock
Snow Blower Spacer
Part #731-04870
This item is available as an individual replacement part that has been OEM sourced to be used with snowthrowers from Craftsman. The metal spacer is part of the auger assembly and it is used to separate the auger blades. This item is available as an individual replacement part.
Snow Blower Recoil Starter Assembly – Part Number: 951-14151
$109.07
In Stock
Snow Blower Recoil Starter Assembly
Part #951-14151
A frayed pull cord, loose handle, or rope that stays extended can make a small engine hard to start. A complete recoil starter replaces the housing, pulley, spring, rope, and grip as one unit. First check that the engine turns freely and that the starter cup is not bent or worn. Match the assembly to the full engine model, type, and code. Remove the spark plug wire and allow hot parts to cool before service. Install every fastener securely, keep the rope clear of sharp edges, and test the rewind action slowly before starting the machine.
Snow Blower Fuel Drain Plug – Part Number: 710-04938
$6.55
In Stock
Snow Blower Fuel Drain Plug
Part #710-04938
Fuel Drain Bolt – Part Number: 710-04945
$6.55
In Stock
Fuel Drain Bolt
Part #710-04945
This mounting bolt seals the fuel system and keeps the fuel bolt securely attached to the carburetor in a variety of gas-powered outdoor equipment. It is a genuine OEM part made of metal with dimensions of 0.25-20 x 0.875 inches. If you notice that the bolt is corroded or rusted, it will need to be replaced. A faulty or loose mounting bolt may cause fuel to leak, make it difficult to start or run your equipment engine, and may allow contaminants to enter the engine. The bolt is easy to install using a wrench or socket. Be careful not to overtighten the bolt as this may damage the fuel bowl. Each item is sold individually.
13 - 24 of 264