31AH54Q Troy-Bilt Snow Blower - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Original cable laid on muffler and melted plastic into the cable housing, seizing cable.
1 person
found this instruction helpful.
-
Jim from Woodbridge, VA
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Only part of repair that took a few seconds was making sure the blower chute moved fully to the right and left. Lucky, the fix is remove cotter pin on the hex shaft, move handle and chute fully to the right or left reinstall hex, check for full swing, replace cotter pin. The cable end is barbed, but can be removed with a twisting pull.
Was this helpful?
Thank you for voting!
Broken Steering Trigger on right side
1 of 2 people
found this instruction helpful.
-
Jeffrey from MASSAPEQUA, NY
- Easy
- 30 - 60 mins
If the trigger is broken on the left side, it is really easy to replace, if broken on the right side like mine the snow chute joystick control is in the way. Just remove the cover under the joystick and then the large nut under the joystick then you will be to push the joystick down giving you access to the pin that holds the steering tri
... Read more
gger.
Read less
Was this helpful?
Thank you for voting!