31699 - Parts

This head assembly is an OEM direct from Craftsman for trimmers. This assembly houses the cutting line and connects to the drive shaft. This head assembly includes one head cap, two push nuts, one washer, and one housing head. You will need pliers to replace this head assembly. This assembly is made of plastic and metal components.

Genuine OEM replacement part, this item is sold individually. This spring is used on all of the trimmers listed below. It is installed between the inner reel and the outer spool assembly. Its purpose is to keep pressure on the Bump Head Knob Assembly.

This is a Manufacturer Approved replacement part designed for Gas String Trimmers. The purpose of this Cover is to secure Foam Filter which is Sold Individually and protect internal parts like Carburetor from dirt and debris. This Assembly includes Plastic Outer Cover, Plastic Insulator and Two (2) Metal Bolts used to attach it to the uni...Read moret. Replacing this part will require a Phillips Head or a Flat Head Screwdriver. To replace simply remove two Screws and pull off the Cover. Please note when replacing this item it is recommended to also replace Air Cleaner Gasket (Sold Separately) which provides an air tight seal between carburetor and Insulator.

This is a genuine anti-rotation screw from the Ryobi manufacturer. The metal screw is compatible with many lawn and garden trimmers. This item works to help secure the clutch cover assembly. This part is sold individually. A screwdriver is needed in making the repair.

This oil seal is an OEM replacement part designed to prevent oil from leaking from the engine or gearbox while keeping contaminants from entering. It is used in various lawn mowers where it ensures that the moving parts in the mower remain adequately lubricated and protected from dirt/debris. The oil seal can wear down due to aging, heat,...Read more pressure, or improper installation. If the seal is no longer functioning oil will leak, the engine will overheat, and its internal components will wear down due to excessive friction. Use seal pullers to remove the seal from its housing on the engine crankshaft or transmission housing. Clean the surrounding area using a cloth or soft brush to prevent contamination and ensure a good seal. Apply oil to the lip of the new seal and firmly press into position until it is flush against the sealing surface. Once you have completed the repair, run the lawn mower to check that there are no longer any leakage or performance issues.

This authentic manufacturer-approved component which is specially designed for use with handheld lawn and garden equipment. The purpose of this o-ring is to provide an air-tight seal between connected parts, unfortunately, over time it may wear out and begin to crack eventually requiring a replacement. Please make sure to check appropriat...Read moree diagrams of your model for the correct location and application of this o-ring. Keep in mind this high-quality item is made of durable rubber and is sold individually.

This retainer clip is a metal piece used to secure components and provide stability inside trimmers. It is an authentic manufacturer replacement clip which is positioned on the trimmer hub and designed to hold the spool in position during use. If the retaining clip is worn down or broken, the trimmer head and outer spool will come loose a...Read morend may slip off the shaft, the trimmer line will tangle and jam, and the trimmer may experience reduced power. You will need a small screwdriver and set of pliers to remove the faulty clip, and a retainer ring tool to lock the new one in position. This part is sold individually.

This is an authentic Craftsman replacement part manufactured for use with trimmers. The head cap protects the line fitting and housing from wear due to contact with the ground. This special head cap is available as an individual replacement part.

This is a genuine OEM sourced part which is specially made for use with Craftsman handheld lawn and garden equipment. Its purpose is to deliver electric current from the ignition system to the combustion chamber. It will ignite the air fuel mixture by the spark. Unfortunately, over time a spark plug can wear out or it may get damaged even...Read moretually requiring a replacement to ensure peak performance. Keep in mind this high-quality spark plug is made of durable materials and is sold individually. Please make sure to refer to the owners manual of your model for the correct location and application of this component.

This is an OEM insulator assembly that is used to protect the carburetor from engine heat and features various seals and hardware made of plastic, steel and rubber. It fits in between the carburetor and cylinder to prevent excessive heat from affecting the performance and operation of the carburetor. It is recommended that you use protect...Read moreive gloves, a screwdriver, and other tools for the replacement process, so check your model for what tools you will need for installation.

This is a genuine replacement part manufactured for use with outdoor power equipment. This flanged hex head screw has several applications, please see model diagram for part use and location. This screw is available as an individual replacement part.