31340C (1986) MTD Snow Blower - Parts

This is a genuine MTD replacement part. The spacer is designed by the manufacturer for use in lawn tractors. This part is made of metal, and is generally used in securing the idler arm. You will require a wrench when replacing this item. This part is sold individually.

This is an original MTD replacement part. The screw is commonly found in tillers, lawn mowers, and snowblowers. This part is made of metal, and is generally used to secure components in the machine. It may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the mach...Read moreine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. This part is sold individually.

This is a genuine replacement part sourced directly from the manufacturer. The hex jam nut is commonly found in MTD lawn tractors and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different nuts used in the machine. Refer to the parts diagra...Read morem to be sure of ordering the correct part. You will require a wrench when replacing this item. The hex jam nut is sold as an individual replacement part.

A shoulder bolt, also known as a shoulder screw, has a cylindrical section between the threaded portion and the head, and can act as a pivot point or shaft for bearings and bushings. This shoulder screw measures approximately 2-inches in length, with 1.53-inches of that being the shoulder section and features a .374-inch diameter. This sc...Read morerew is made of high-quality metal and is sold as an individual part. This shoulder screw is compatible with several different makes and types of lawn equipment and is a genuine OEM part. If you notice any damage, or excessive movement or looseness from this screw, it needs to be replaced. Depending on your make and type of equipment, this screw will be installed differently, but you only need a wrench to unscrew it.

This is a genuine part which is supplied directly by the original equipment manufacturer and is used with MTD edgers. The V-belt connects the engine pulley to the transmission pulley to propel the unit forward. This part is made of rubber and is sold individually. For this repair you will need a screwdriver, a socket wrench, and a pair of...Read more needle nose pliers to aid you. Be sure to remove the spark plug and boot on the unit to avoid premature starting.