EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

31000PAAT Magic Chef Range - Instructions

All Instructions for the 31000PAAT
16 - 30 of 38

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
My oven door seal had dried rotted
1 person found this instruction helpful.
  • Anita from ELKTON, VA
  • Really Easy
  • 15 - 30 mins
  • Pliers
I took pliers to get the old one off, and popped the new one back in its place, and it fit perfect.
Was this helpful?
Thank you for voting!
The oven bottom was warped and could not be positioned properly in the oven.
1 person found this instruction helpful.
  • Tara from ALBANY, NY
  • Easy
  • 15 - 30 mins
Removing the old oven bottom was easy...as it was already outside of its slots. Installing the new one was pretty easy. I placed the oven bottom in the front slots first...then the rear slots...no tools necessary.
Was this helpful?
Thank you for voting!
Simply remove and install new parts
1 person found this instruction helpful.
  • Jacob from LITTLE CANADA, MN
  • Really Easy
  • 15 - 30 mins
Overall, it was painless and easy with zero problems
Was this helpful?
Thank you for voting!
Drip pans were rusted. I had shopped for replacements at local appliance stores without finding them.
1 of 2 people found this instruction helpful.
  • Norma J from Philadelphia, PA
  • Really Easy
  • Less than 15 mins
Removed the rusted drip pans and replaced them with the new pans. Range looks great and ready for many more years of use!
Was this helpful?
Thank you for voting!
Old and corroded drip pans
1 of 2 people found this instruction helpful.
  • Veronica from Miami Beach, FL
  • Really Easy
  • Less than 15 mins
Furtunately, it was just a replacement of the drip pans. It changed the entite looks of my range for under $ 25.00 dollars. Very satisfied!
Was this helpful?
Thank you for voting!
Thermostat bulb was hanging loose
2 of 5 people found this instruction helpful.
  • Willi from Old Saybrook, CT
  • Really Easy
  • Less than 15 mins
  • Pliers
Removed what was left of the original clips. Pressed in the new clips and snapped in the themostat blub
Was this helpful?
Thank you for voting!
The floor panel of the oven was pocked and in bad shape
2 of 6 people found this instruction helpful.
  • Roger from San Juan Capistrano, CA
  • Really Easy
  • Less than 15 mins
I found the panel on the innernet, ordered it and when it arrived I removed the old one and replaced it with the new one.
Was this helpful?
Thank you for voting!
thermostat temprature bulb hanger clips
1 of 4 people found this instruction helpful.
  • Dwayne from Atlanta, GA
  • Really Easy
  • Less than 15 mins
snaped them into oven cavity attached temp bulb job complete
Was this helpful?
Thank you for voting!
When I decided to do an extra cleaning of the rqnge, I removed the knobs, along with all the other parts and soaked them in the sink....I cleaned the knobs and set them up on the dish drainer to dry for a minute while I cleaned the rest of the stove...I dried the knobs, paced them back on the stove.
0 of 1 people found this instruction helpful.
  • Betty from Nashua, NH
  • Really Easy
  • Less than 15 mins
It was easy since it just pushes on...
Was this helpful?
Thank you for voting!
cracked and missing paerts of the seal
  • Cynthia from Petersburg, IL
  • Really Easy
  • Less than 15 mins
Popped in there real quick. Wish I would have done it sooner, my oven heats up much faster.
Was this helpful?
Thank you for voting!
Rubber seal was broken
  • Jennifer from Lynn, MA
  • Really Easy
  • Less than 15 mins
  • Pliers
Broke the same day I installed it
Was this helpful?
Thank you for voting!
As easy as it could be
  • Phillip from Twentynine Palms, CA
  • Really Easy
  • Less than 15 mins
  • Pliers
I have worked in maintenance field most of my adult life and all aspects and to change the oven door gasket was no challenge what so ever. It took longer to find my needle nose pliers to remove the old gasket clips and then re-install the new gasket. Maybe 10 minutes total
Was this helpful?
Thank you for voting!
Door seal was pulled out by grandson.
  • Michael P from Hickory Hills, IL
  • Really Easy
  • Less than 15 mins
  • Pliers
finished removing door seal, used pliers to remove old securing studs. positioned new seal and pushed securing studs into existing holes and was done.
Was this helpful?
Thank you for voting!
Broken leveling leg.
  • Don from Crestwood, MO
  • Really Easy
  • Less than 15 mins
  • Pliers
This is a no brainer. I am only doing this because you asked. Pull out the stove, tilt it back, remove broken leg, install new leg.
Was this helpful?
Thank you for voting!
new drip pans
  • Sharon from Bridgeville, PA
  • Really Easy
  • Less than 15 mins
I tried to get black drip pans to replace the ones I had which were well in need of changing. They no longer make the black so I found the silver ones on your site and thought for the price I would try them. They are wonderful and very reasonably priced. I ended up buying a spare set for later. Thank you for such great products and pr ices.
Was this helpful?
Thank you for voting!
All Instructions for the 31000PAAT
16 - 30 of 38