31-69 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Original terminal degraded and faulty
2 of 2 people
found this instruction helpful.
-
Robert from PRAIRIEVILLE, LA
- Easy
- 15 - 30 mins
-
Screw drivers
Turn off power, remove heat coil assembly and drip pan. Unscrew the terminal assembly from the range top. Cut back 3 inches on each terminal wire and strip insulation 3/8 inch. Terminal assembly should be with the short side of the black block (from the side securement hubs) facing toward the coil stems. Slide the shrink wrap onto
... Read more
each wire and Twist each old with each new wire using the wire nuts and slide the shrink wrap Over each. Using a hair dryer, heat gun, or open flame carefully shrink the wrap. Secure the terminal back in place on the range.
Read less
Was this helpful?
Thank you for voting!
the burner stop working
2 of 2 people
found this instruction helpful.
-
Anthony J from HAMMONTON, NJ
- Really Easy
- 15 - 30 mins
-
Screw drivers
Just followed the instructions
Was this helpful?
Thank you for voting!
Element burnt out and cracked
2 of 2 people
found this instruction helpful.
-
Robert from LOUISVILLE, KY
- Very Easy
- 15 - 30 mins
-
Nutdriver
I simply followed the instructions in your video. i shut down the power to the oven via the breaker panel, removed the two quarter inch screws with a nut driver, pulled out the old element exposing the two wire leads,disconnected one lead at a time and duct taped each lead to the oven wall,. Then removed the old element and replaced th
... Read more
e new one in reverse order. Voila! It works great. This is the second element I replaced in this oven over the years. This site was prompt on shipping the new element (about 3 days since I ordered on a Sunday).. It was well packed and arrived on time and I even got an e-mail letting me know it arrived! How cool is that?! I've been a customer for a few years now and plan to be a "forever" customer. Thanks for saving the day! You ROCK!
Read less
Was this helpful?
Thank you for voting!
Oven bake element failed.
2 of 2 people
found this instruction helpful.
-
Gerald from PALM COAST, FL
- Easy
- 15 - 30 mins
-
Nutdriver
I watched the video of the repair. It was very easy; removed 2 screws; disconnected 2 push-on tabs; removed the element; and then reversed the operation. Be sure to turn off the circuit breaker that powers the oven before you start the repair. Turn it back on when finished and test the oven.
Was this helpful?
Thank you for voting!
oven door not closing completely
2 of 2 people
found this instruction helpful.
-
David from BIRDSBORO, PA
- Very Easy
- 15 - 30 mins
older range required no tools to repair, pulled old gasket out of notches at bottom of door, popped clips out of pre-drilled holes, folded new gasket ends {2 inches} and pushed into door, pushed clips into place.
Was this helpful?
Thank you for voting!
bake element burned out
2 of 2 people
found this instruction helpful.
-
Kenneth from Wantage, NJ
- Really Easy
- 15 - 30 mins
-
Screw drivers
Unscrewed screws in back of oven holding element. Slipped old element off of wire. No need to cut wires has the kind of ends (spade ends I think they are called) that just is pushed on to element. Attached new element. slid wires back into wall of wire rescrewed to oven wall. Very easy just be sure wires don't get pulled back into b
... Read more
ack wall of oven. Don't know what you would do then.
Read less
Was this helpful?
Thank you for voting!
Heavy jam boiler caused elements to sag
2 of 3 people
found this instruction helpful.
-
Danny L from CHELAN, WA
- Really Easy
- Less than 15 mins
Removed the old & simply inserted the new one
Was this helpful?
Thank you for voting!
oven Bake Element burned up and broke
2 of 3 people
found this instruction helpful.
-
Robert from Hopkinsville, KY
- Really Easy
- Less than 15 mins
-
Nutdriver
this bake element has two special Hex style screws, securing it in place, but a nut driver worked just as well. remove the baking racks, and then loosen the two hex screws. slowly pull the element out of the back wall and then disconnect the electric leads. reinstall by doing then the opposite action. could not have be simpler.
Was this helpful?
Thank you for voting!
Replace Element & Drip Bowl
2 of 3 people
found this instruction helpful.
-
Fernando from Orlando, FL
- Really Easy
- Less than 15 mins
Just replace the parts. Too easy for an old man.
Other Parts Used:
Was this helpful?
Thank you for voting!
Lacking oven racks on used appliance
2 of 3 people
found this instruction helpful.
-
Katherine from Roanoke, VA
- Really Easy
- Less than 15 mins
Your website is great...easy and it literally took me no mote than 5 minutes to find what I needed and order...and received it VERY quickly. Must say I was dreading going to some parts house that we have in our town in bad area, and searching on dusty shelves for what I needed...am so glad I found you!!
Was this helpful?
Thank you for voting!
Oven lower element broke
2 of 3 people
found this instruction helpful.
-
Peggy from Owensville, MO
- Really Easy
- Less than 15 mins
-
Screw drivers
Take the screws out of the inside of oven for the element and slide the oven away from way and remove the back and insert the element to the clips and screw the back of the oven back together and plug in again and push back in place. Very easy for my husband to repair.
Was this helpful?
Thank you for voting!
Element did not heat
2 of 3 people
found this instruction helpful.
-
Susan from Iowa City, IA
- Really Easy
- Less than 15 mins
-
Screw drivers, Wrench set
After doing without the oven for a week or so we decided to turn to the internet and try doing the repair ourselves. We are not mechanically inclined/fix it yourself kind of people. This really was easy. Just detach the old element and attached the new one. A couple of bolts and snapping one out and then the new one in. Very simple
Was this helpful?
Thank you for voting!
heating element stopped working
2 of 3 people
found this instruction helpful.
-
Kevi from Verona, WI
- Really Easy
- Less than 15 mins
-
Wrench set
All I had to do was loosen the screws, pull out electrical hookup on both ends, hookup new heating element to elecric and screw em into place. That's it, super easy and I got the part in 2 day : )
Was this helpful?
Thank you for voting!
Bake Element burned in to stopped working
2 of 3 people
found this instruction helpful.
-
Debbie from Mineral Wells, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver
Turned off power to appliance removed the screws connecting the element. Disconnected the wires from the old element connected the new element replaced the screws and tightened turned power on turned power back on heated oven to be sure it worked. Very simple to do.
Was this helpful?
Thank you for voting!
bake element burnt out
2 of 3 people
found this instruction helpful.
-
Kim from Union Grove, WI
- Really Easy
- 15 - 30 mins
-
Nutdriver
I looked for the proper part on this site. I was even able to find a video on how to install the part. It was great to see the step-by-step directions and tools needed. I ordered the part. It came quickly so that I was able to get my oven repaired before my kids came home for spring break. The only problem I had was the old screws were re
... Read more
ally stuck on. I used some WD-40 and they were still quite stuck. I learned that by gently going back and forth with the nut driver, rather than just trying to turn in the correct direction, that the screws came out quite easily. I felt so proud to be able to fix my own stove and save money in the process! Very satisfying for a single mom. Couldn't have done it without the video directions.
Read less
Was this helpful?
Thank you for voting!