EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

31-69 - Instructions

All Instructions for the 31-69
61 - 75 of 889

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
the bottom oven element shorted and melted
6 of 6 people found this instruction helpful.
  • angela from lake placid, NY
  • Easy
  • 15 - 30 mins
  • Screw drivers
pulled oven out, unplugged, unscrewed element attachment to the back of the oven (from the inside). element did not work. we tested the upper element and that did not work either. the burst of sparks, heat and flame from the shorting of the original element caused damage to the computer board. we called a local repair man to change the computer board, and then the unit worked, with our new element that we replaced!
Was this helpful?
Thank you for voting!
Oven racks rusted
11 of 21 people found this instruction helpful.
  • Wendell from Ocala, FL
  • Really Easy
  • Less than 15 mins
Ordered new racks and replaced them.
Was this helpful?
Thank you for voting!
Broken Drawer Glide
6 of 6 people found this instruction helpful.
  • Sharon from Hamlin, NY
  • Really Easy
  • Less than 15 mins
It snapped right into the drawer, was very easy
Was this helpful?
Thank you for voting!
Broil element weak. Bake element non-working.
7 of 10 people found this instruction helpful.
  • David from Marysville, WA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
TURN OFF CIRCUIT BREAKER OR UNPLUG FROM SOCKET! Removed back of range panel: easy
Disconnected wires to elements: easy (one broken off)
Replaced connector: easy
Pulled both elements out and replaced: easy
Tested and replaced range back panel: easy

Be careful when handling steel panels...they can cut your hands! Use nutdrivers, they're better than screwdrivers. Use a good flashlight.
Was this helpful?
Thank you for voting!
broken lens over oven light
11 of 22 people found this instruction helpful.
  • Leslie from Warsaw, VA
  • Really Easy
  • Less than 15 mins
Your service was OUTSTANDING...Ordered one afternoon, and before lunch time the next day, the delivery man rang my door bell...Thanks a bunch for you excellent service.....
Was this helpful?
Thank you for voting!
Easy as could be
8 of 13 people found this instruction helpful.
  • Kenny from HENDERSONVLLE, TN
  • Very Easy
  • Less than 15 mins
  • Nutdriver
2 1/4 inch screws and 2 blade connectors fir the power. Took me longer to find my nutdriver than the repair.
Was this helpful?
Thank you for voting!
Element burned out
6 of 7 people found this instruction helpful.
  • James from Colonial Beach, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. The I reversed the process to install the new element which was exactly the same as the burned out one.
At first I was on the verge of replacing the whole stove before I decided to google " ra nge heating elements". I ordered the part from your company and it arrived promptly.
Needless to say, I am thrilled that I don't have to buy a new stove. This one now works perfectly!
Was this helpful?
Thank you for voting!
The elements were not heating up
6 of 8 people found this instruction helpful.
  • Tanya from KALISPELL, MT
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
It was really easy just unplugged it took off the back cover changed the part out put back cover on plugged it in and the elements were working great!
Was this helpful?
Thank you for voting!
Element burned out.
6 of 9 people found this instruction helpful.
  • Pamela from FRIDLEY, MN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Turned off power at the circuit box. After locating 1/4" nut driver (the hardest part of the repair)I removed the oven racks. Took the opportunity to wipe out oven. Removed the two screws holding the element in place.Pulled element out gently to expose the connections. Wiggled the terminal connector off the terminal on element. Gave the w ire a little bend to keep it from pulling back into frame. Repeated process on other side. Removed new element from wrapper. Placed element on oven floor, reattached terminals--making sure they were on snuggly--carefully slid terminal ends back though slots in oven body. Lined up brackets, reinstalled screws, replaced racks and turned power back on. Turned oven on it worked. Made cookies! Very easy repair.
Was this helpful?
Thank you for voting!
Refrigerator Light bulb went out
7 of 12 people found this instruction helpful.
  • ANGELA from MEBANE, NC
  • Very Easy
  • Less than 15 mins
I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.
Was this helpful?
Thank you for voting!
Glides broke on lower storage drawer
5 of 6 people found this instruction helpful.
  • James from WEST BEND, WI
  • Really Easy
  • Less than 15 mins
The front glides easily snap into a hole on the sides of the range. The rear glides easily snap onto the sides of the lower rear of the drawer.
Was this helpful?
Thank you for voting!
Couldn't find replacement trays locally. Part Select was very helpful and prompt in shipping.
5 of 7 people found this instruction helpful.
  • Rosemary from St. Albans, ME
  • Really Easy
  • Less than 15 mins
Just placed the chrome bowl trays in place and was good to go. They look very nice.
Was this helpful?
Thank you for voting!
The oven bake element developed a hot spot which failed shortly after the hot spot developed.
4 of 4 people found this instruction helpful.
  • Dave from BRISTOL, VA
  • Very Easy
  • Less than 15 mins
  • Nutdriver
Unplug the stove or disconnect at the breaker. Open the oven and remove the bake racks. Using a nut driver (or Phillips Screwdriver) remove the screws (one per side) that secure the bake element. Place them in a safe/secure place outside of the oven. Carefully pull straight back on the element until about 3 inches of the wire, that connec ts to the element, is exposed. Carefully unplug the wire from each element (make sure that the wire does not pull back into the oven insulation. I placed a small metal clip on each wire). Remove the old element and plug the new one in. Put everything back in the exact same way you took the old one out. Power the oven up and preheat your oven. Monitor this - should be no problem at all. Very simple process. My first attempt at this and it was very easy.
Was this helpful?
Thank you for voting!
While removing burned out light bulb, the glass cover fell to the floor of the oven and broke!!
5 of 7 people found this instruction helpful.
  • Phyllis from GAINESVILLE, GA
  • Easy
  • Less than 15 mins
Husband very ill in bed. It's up to me!! Got a new bulb at HomeDepot and figured out how to get that wire 'thing' back in and the new glass cover installed. I DID IT!! WOW! My husband has always done these jobs around the house.......but now it's up to me.......and I'm not so dumb after all! I DID IT!! Now everyone who comes in the house.....I show them what I DID!! :-)
Was this helpful?
Thank you for voting!
element burnt out
5 of 7 people found this instruction helpful.
  • Demoris from GOLDSBORO, NC
  • Really Easy
  • 15 - 30 mins
purchased a square bit and removed screws easily and disconnected it from the wiring and pushed in the new element secured screw and it was back to baking.
Was this helpful?
Thank you for voting!
All Instructions for the 31-69
61 - 75 of 889