3066 - Parts

This replacement flat washer is sourced directly from the original equipment manufacturer, it is specially designed for use with Toro riding lawn and garden equipment. It helps to distribute the pressure evenly between connected parts to ensure a tight fit, please refer to the appropriate diagrams of your model for the correct location an...Read mored application of this hardware. Keep in mind this durable metal washer is sold individually.

A deck wheel that drags, wobbles, or has a flat spot may no longer protect the turf correctly. The smooth roller touches the ground when the mower deck passes over a raised area, helping prevent the blade from cutting deep patches. Check deck level and tire pressure first because poor adjustment can also cause scalping. Match the replacem...Read moreent using the complete mower model and serial number, and compare the bore, width, bracket spacing, and required hardware. Shut off the engine, remove the key, set the parking brake, and disconnect the spark plug before service. Support the deck securely, tighten the fastener properly, and make sure the wheel turns freely.

This is an OEM part sourced directly from the manufacturer. The diode is designed for use in Toro lawn tractors. This part is made of metal and high-quality plastic, and is an electrical component that is attached to the relay to help control the flow of electricity through the machine. You may require a wrench or screwdriver when replacing this part. This item is sold individually.

This is an authentic replacement part manufactured for use with Toro snowthrowers. The special hex head screw is used with a variety of different snowthrower models and has multiple applications. This screw is available as an individual replacement part, please see model diagram for associative parts.

This item has been sourced from the original manufacturer to ensure quality. The metal screw is intended to be used with snowthrowers from Toro and Lawn-Boy. This screw is used to secure the bearing flange to the side of the auger housing. The screw is priced as a single item.

This item is priced individually. The flat washer goes next to the hub cap and is made of metal. During the installation process, a wrench might be needed to replace this part. It will need to be replaced if it bends or breaks. This is a genuine Toro part sourced directly from the manufacturer for use in lawn mowers and lawn tractors.

This authentic manufacturer-sourced nut-lock is made for use with Toro and Lawn-Boy snowthrowers. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the exact location and the correct application of this nut-lock. It is made of dur...Read moreable metal and is sold as an individual item. A wrench will be needed to secure or remove it.

This is a genuine manufacturer sourced replacement lock nut which is specially designed for use with Toro snowthrowers. It is a standard hardware which has multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this part. Keep in mind this high-quality nut is made of durable metal and is sold individually.

This is an authentic HHHH replacement part, sourced from the original manufacturer for use with outdoor power equipment. The special lock nut is used with several different types of equipment and the application of the nut can vary based on the model of the tool. This lock nut is available as an individual replacement part.