30550 - Parts

This replacement washer is a genuine OEM sourced part. It is commonly used on a variety of Murray riding lawn mowers and tractors. Washers helps to distribute the pressure evenly between two connected parts. This washer is generally used to help securing mower wheels. For proper application please refer to diagrams of your model. This met...Read moreal washer is sold individually. When replacing it you should only need a wrench to remove the lock nut that secures the wheel to the axle.

The Shoulder Bolt (size: 3/8 16 x 3/4) is a black, metal, individually sold part. It can be installed using a wrench or socket. This part is used to secure other parts in place. You'll know if it needs to be replaced if the part is coming loose. This means it is damaged, likely due to fatigue/wear/damage. Refer to your make, model and diagrams to ensure you're picking the right part.

This is an authentic Murray part that has been OEM sourced to ensure a high-level of quality. The light socket is intended to be used with riding lawnmowers. This item is used to mount the headlights and to link the light bulbs with the electrical system. This item is available as an individual replacement part.

The Lock Nut is used to secure and lock parts in place. This is a gold, metal, individually sold part which can be installed with a wrench set, and socket set, and attaches onto various locations on a variety of equipment. If broken, damaged or worn, the part may be loose, and there may also be physical damage to the nut, at which time it...Read more should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

This is an authentic OEM sourced part which is specially made for use with Toro snowthrowers. It is an identical replacement for a missing or a faulty retaining ring that was installed on a new unit. The purpose of this part is to secure a component on a shaft, please make sure to refer to the appropriate diagrams of your model for the co...Read morerrect location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.