30489 Toro Lawn Mower - Parts

A deck wheel that drags, wobbles, or has a flat spot may no longer protect the turf correctly. The smooth roller touches the ground when the mower deck passes over a raised area, helping prevent the blade from cutting deep patches. Check deck level and tire pressure first because poor adjustment can also cause scalping. Match the replacem...Read moreent using the complete mower model and serial number, and compare the bore, width, bracket spacing, and required hardware. Shut off the engine, remove the key, set the parking brake, and disconnect the spark plug before service. Support the deck securely, tighten the fastener properly, and make sure the wheel turns freely.

This is an authentic replacement part manufactured for use with Toro snowthrowers. The special hex head screw is used with a variety of different snowthrower models and has multiple applications. This screw is available as an individual replacement part, please see model diagram for associative parts.

The screw is made of metal and attaches to the front panel. This is a genuine Toro and Lawn Boy part sourced directly from the manufacturer for use in snowblowers. Keep in mind that this item is sold individually. When replacing this part a flat head screwdriver might be required during the installation process. It might strip or break over time and will need replacing.

This is a genuine manufacturer-sourced component which is specially made for use with Toro snowthrowers. It is a standard hardware which may have multiple applications. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this screw. Keep in mind it is a high-quality component is ...Read moremade of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This item has been sourced from the original manufacturer to ensure quality. The metal screw is intended to be used with snowthrowers from Toro and Lawn-Boy. This screw is used to secure the bearing flange to the side of the auger housing. The screw is priced as a single item.

This lock nut is used to secure threaded fasteners, to prevent them from loosening and falling off during use. It is sourced from the original manufacturer for use in various lawn and outdoor equipment. The nut has a nylon insert on one end which holds the fastener and locks the nut in position. It comes in a hexagonal shape, which makes ...Read moreit easier to grip, and ensures better stability. It is normal for a lock nut to corrode, crack or wear down over time. You will likely notice increased vibration, noise, and instability from your equipment when the nut is no longer able to securely hold the fastener. To remove and replace a lock nut, nut use a wrench or socket. Regularly inspecting and replacing the lock nuts in your equipment is important in maintaining the longevity of the equipment. Each nut is sold individually.

This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The metal hex head screw is used with a variety of different models of snowthrowers. This screw can have different applications depending on the model of snowthrower. The screw is sold as an individual replacement part, please see model diagram for part location and usage.