3032 - Parts

It is an authentic OEM part that is specially made for use with Toro and Lawn Boy snowthrowers. This is an identical replacement for a faulty or a missing hardware that was installed on a new unit. It is one of the screws utilized to secure the upper and the lower handles. This high-quality component is made of durable metal and is sold a...Read mores an individual item. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct application. A wrench will be needed to perform this repair.

This OEM Top Locknut measures 5/16x18, is made of metal, and it isused to secure parts in place and prevent backing out from vibration. Replacing this part varies in difficulty depending on the part it is securing and the equipment in question, but it is generally an easy job according to our customers. Installation requires a wrench or socket.

A deck wheel that drags, wobbles, or has a flat spot may no longer protect the turf correctly. The smooth roller touches the ground when the mower deck passes over a raised area, helping prevent the blade from cutting deep patches. Check deck level and tire pressure first because poor adjustment can also cause scalping. Match the replacem...Read moreent using the complete mower model and serial number, and compare the bore, width, bracket spacing, and required hardware. Shut off the engine, remove the key, set the parking brake, and disconnect the spark plug before service. Support the deck securely, tighten the fastener properly, and make sure the wheel turns freely.

This authentic replacement part is supplied directly from the original equipment manufacturer for use with Toro lawn and garden equipment. It is an identical replacement for a missing or a faulty carriage bolt that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and...Read more application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

The screw is made of metal and attaches to the front panel. This is a genuine Toro and Lawn Boy part sourced directly from the manufacturer for use in snowblowers. Keep in mind that this item is sold individually. When replacing this part a flat head screwdriver might be required during the installation process. It might strip or break over time and will need replacing.

This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The metal lock nut is used with several different models of snowthrowers and the application of the nut can vary depending on the model of machine. This nut is available as an individual replacement part.

This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The metal hex head screw is used with a variety of different models of snowthrowers. This screw can have different applications depending on the model of snowthrower. The screw is sold as an individual replacement part, please see model diagram for part location and usage.