3028 - Parts

This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with snowthrowers. The metal hex nut is commonly used to fasten the bolt that secures the height skid to the auger housing. This item is available as an individual replacement part, please note four nuts may be required.

A deck wheel that drags, wobbles, or has a flat spot may no longer protect the turf correctly. The smooth roller touches the ground when the mower deck passes over a raised area, helping prevent the blade from cutting deep patches. Check deck level and tire pressure first because poor adjustment can also cause scalping. Match the replacem...Read moreent using the complete mower model and serial number, and compare the bore, width, bracket spacing, and required hardware. Shut off the engine, remove the key, set the parking brake, and disconnect the spark plug before service. Support the deck securely, tighten the fastener properly, and make sure the wheel turns freely.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn and garden equipment. It is an identical replacement for a missing or a faulty vented cap that is specially designed to keep the fuel in the tank, please make sure to refer to the appropriate diagrams ...Read moreof your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable plastic and is sold individually.

It is a genuine OEM sourced part that is specially produced for use with Murray and Snapper lawn and garden equipment. This is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. This high-quality carriage ...Read morebolt is made of durable metal and is sold individually, keep in mind the washer and other parts are all sold separately.

This part is an OEM from the Kawasaki manufacturer. The carburetor gasket is constructed of a cardboard composite, and is made for use with many 4 stroke engines. On the manifold-intake, a carburetor gasket is fitted on each side of the insulator. Keep in mind this item is sold individually. The gasket has been designed to prevent damage...Read more to engine parts and absorb fuel leakage. A screwdriver and a wrench may be needed to make the removal and replacement. This part is sold individually. It is recommended to refer to engine manual and diagrams for further instruction.

This is an authentic manufacturer sourced replacement v-belt which is specially designed for use with Murray, Snapper and Simplicity lawn mowers. It is the main deck belt that is used to drive the blades, over time belts tend to wear out and stretch eventually requiring replacement to maintain peak performance. Clean the pulleys off befor...Read moree installing the new belt to ensure top performance and longevity with your new belt. This part is made of high-quality rubber material and it is sold individually.

Wheel gauge

This is an authentic manufacturer-sourced replacement part, it is specially designed for use with Murray, Snapper and Simplicity lawn and garden equipment. It helps to distribute the pressure and provide a tight seal between connected parts. This is a standard hardware which has multiple applications, please make sure to check the appropr...Read moreiate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality spacer is made of durable metal and is sold individually.

This is an authentic replacement part manufactured for use with Toro snowthrowers. The special hex head screw is used with a variety of different snowthrower models and has multiple applications. This screw is available as an individual replacement part, please see model diagram for associative parts.