My Orders
301Z Poulan Lawn Mower - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
bent mower blade
2 of 3 people
found this instruction helpful.
-
Dan from Taylor, MI
- Really Easy
- Less than 15 mins
-
Wrench (Adjustable)
it was a 5 minute job all I did was jack up the rear of the mower lay down along side of it and install the new blade tighten up the bolt then I lower the mower back down to the ground the started up the mower for a test run of the blade. and it works just fine
Was this helpful?
Thank you for voting!
Worn out Mandrel Assemblies
2 of 5 people
found this instruction helpful.
-
Joseph from CANBY, MN
- Difficult
- More than 2 hours
-
Socket set
Remove Deck, Remove Blades, Remove guards and belt, use old belt to hold pully to remove pully (would be good to have pully wrench), Remove mandrel Assembly, Install new mandrel assemblies (had to tap the new mandrel assemblies. Should have been done by manufacturer.). Reinstall blades, guards, and belt. Put deck back on.
Was this helpful?
Thank you for voting!