30102 - Parts

This thrust washer is an authentic item which is supplied by the original manufacturer for Murray and Snapper lawn mowers. It is a special type of washer that will resist torque applied by the bearing while ensuring a tight fit. Over time it may wear out, get damaged or simply lost eventually requiring a replacement. This thrust washer is...Read more made of a durable material and is sold as an individual component. Note, you may need a wrench set to remove and resecure the hardware that holds this part. Check the diagrams of your specific model for the exact location and application.

This replacement ball bearing is an authentic OEM component which is designed for use with Murray and Snapper lawn and garden equipment. Bearings are utilized to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. S...Read moreymptoms of failing bearing may include squealing, screeching, and an entirely new type of "grinding" (usually heard or felt as the motor powers-down). This high-quality component is made of durable metal and is sold as an individual part. A wrench set will be needed to perform this repair. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installation of this item. This is an original part for Murray lawn tractors and Snapper rear engine rider mowers.

This is a genuine manufacturer-sourced component which is specially produced for Briggs and Stratton engines commonly installed on lawn and garden equipment. It is a standard hardware that is generally utilized to secure the debris screen guard, please make sure to refer to the appropriate diagrams of your model for the correct location a...Read morend use of this screw. Keep in mind it is a high-quality component which is made of durable metal and is sold individually.

It is an authentic part that is supplied by the original manufacturer for use with Murray and Snapper lawn mowers. This is an identical replacement for a missing or a damaged bumper that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the correct repair procedure. Keep in mind this high-quality bump...Read moreer is made of durable metal and is sold individually. Note, the hardware to secure it is sold separately. A wrench set will be needed to replace this part.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

The spring helps to control the speed of the engine. This is an authentic Briggs & Stratton and Toro replacement part that is sourced from the original manufacturer for use with lawn mowers, lawn tractors, and engines. A set of pliers may be required to replace this part if it becomes lost or broken. It is made of metal and is sold individually.

This is an original part from Snapper. The #10-32 x 1/4 screw is compatible with many riding lawn tractor engines. The metal screw is often used to secure the switch bracket to the main case weldment. For the repair, you will need a screwdriver. The screw is sold individually.

This part is an OEM from Briggs & Stratton. The engine gasket set is composed of cardboard composite gaskets, rubber seals and other components used to seal engine parts. The set is compatible with many lawn tractor engines, and is sold individually. A socket set and a wrench set are needed for making the replacement.

The float valve is used to allow fuel into the float chamber when the chamber has been drained and to stop fuel from entering the chamber when it is full. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. This authentic part is supplied by the original equipment manufacturer for use...Read more with Kawasaki engines commonly installed on lawn and garden equipment. Please make sure to refer to the appropriate diagrams of your model to ensure the correct repair procedure. Keep in mind this high-quality valve-fuel inlet is sold as an individual item.

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.