2924 - Parts

The air valve attaches to the wheel and is made of a durable material. This is a genuine MTD, Ryobi, Yard Machines, Bolens, Troy-Bilt, and Yard Man part sourced directly from the manufacturer for use in chippers, shredders, cultivators, edgers, lawn tractors, snowblowers, and trimmers. Keep in mind that this part is sold individually. Whe...Read moren replacing this item a set of pliers might be required during the installation process. It might wear out over time and will need replacing.

This OEM Hub Cap, or Dust Cap, is a 2-inch, silver, steel part, sold individually. It requires a Rubber Mallet to install and its installation is rated as Easy by our customers. This part attaches inside the wheel on the hub, and is used to keep dirt out of the hub. It must be replaced when damaged or missing (if it is damaged it will b...Read moree out of round, and will not fit). Check your model number to ensure you are purchasing the correct part.

The OEM E-Ring is a silver metal part used to secure the wheel on the shaft. If broken, the wheel may fall off, and the part must be replaced. It is rated as "Easy" to install and requires pliers and a screw driver.

This part is made of metal and is available as an individual replacement. The blade adapter fits between the washer shim and the retaining ring. An allen wrench may be required to replace this item if it becomes broken. This item is an original part from Snapper, Murray, and Simplicity for use in mower tractors.

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

Key-ignition indak

This grease seal, also known as an oil seal or a shaft seal, in your log splitter or chipper shredder serves as a protective barrier. It keeps lubrication inside the bearings and stops dirt from entering them. It is commonly located in the wheel hubs or axle assemblies of your machine. A broken grease seal leads to contaminated bearings. ...Read moreYour machine will then undertake more friction and can overheat, reducing its performance. You will need a seal puller or a flathead screwdriver to pry a grease seal out of your machine. When installing the new grease seal, apply a thin layer of lubricant to its inner surface before pressing it into its housing. Please be informed that this OEM-certified component is sold individually.

This OEM replacement washer is often used on several different types of lawn and garden equipment but can also be used on compatible home appliances. It is made of metal meaning it is vulnerable to corrosion and will produce more noise from your lawn equipment or appliance if it has broken. Its main purpose is to reduce rattling and noise...Read more or to better secure and evenly distribute pressure between two different parts. This washer has a .38-inch inner diameter .87-inch outer diameter and .09-inch thickness and is sold individually.

This external retaining ring is a type of fastener used to secure components in various models of tractors. It is a genuine OEM replacement part provided by the manufacturer, also known as an E-ring or circlip, which is responsible for exerting pressure against components prevent it from dislodging. The ring is a circular metal part with ...Read moreprotruding tabs or ears that can be gripped for easy removal or installation. If the retaining ring wears down or becomes damaged, it will cause the equipment parts to become unstable or fall off resulting in loss of functionality, and damage. Use retaining ring pliers to compress the ring and slide it out of its groove. Align the new ring with the groove and slide it in. Each external retaining ring is sold individually.

This genuine manufacturer-sourced item is specially made for use with Murray, Snapper and Simplicity lawn and garden equipment. It is a special hardware that helps to provide a tight fit between connected parts. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to refer to th...Read moree appropriate diagrams for your model to ensure the proper repair procedure. A wrench set might be needed to replace this part. One durable bushing is included.