2873B Frigidaire Range - Parts

This part also includes 3 screws. Small burner cap is sold separately.

This is a gas range LP conversion kit for your gas range unit. It converts natural gas ranges to liquid propane (LP) gas. The kit contains four of the following: orifice, restrictor screw, burner restrictor, and burner choke. Each of these parts is less than an inch long. This kit also contains a label for the regulator, a rating/serial p...Read morelate, and a detailed instruction booklet with everything you need to complete the job efficiently.

This is a clock knob for an electric range, oven, or stove. It allows you to adjust the clock and cooking timer. No tools are required for this repair, the knob simply pops on and off the turn shaft. It is recommended to check all knobs on your appliance before ordering. This part is approximately 1/2 inch in diameter, is made of plastic,...Read more and is black in color. It is sold individually. This knob is a genuine original manufacturer part.

This flat style gas oven igniter comes with a bracket and wires. Its amperage range is between 3.2 and 3.6 amps.

Sold Individually. Pan Head Screw - 8-18ab X 0.375

This is a bulb clip, also known as a sensor clip or bulb holder, which is designed to hold the thermostat bulb in place within the interior of various models of ovens. This clip is made of metal, measures approximately 1-inch in length and is a genuine OEM part, but is sold by itself and without the thermostat itself. The thermostat bulb,...Read more also known as a capillary thermostat, is used to measure the interior temperature of the oven during operation, and this clip secures it. If you notice your oven heats unevenly, too little or too much, this clip may be rusted, broken or damaged and causing the thermostat bulb to not detect the internal temperature properly. To replace this clip, you will likely need your user manual and a screwdriver and/or wrench. You will first need to disconnect your oven from the wall outlet and remove it from the wall. Use your user manual to locate the thermostat and use your screwdriver and/or wrench to remove the panel covering it. Here, you can likely replace the old clip with the new one, and then reassemble your oven.