My Orders
286000 Weed Eater Lawn Mower - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Take the wheel off. Place the key in the slot. Put the wheel back on.
7 of 19 people
found this instruction helpful.
-
Gary from PILESGROVE, NJ
- Very Easy
- Less than 15 mins
Just described it.
Was this helpful?
Thank you for voting!
Lound deck noise when mower put into motion
4 of 16 people
found this instruction helpful.
-
Steven from Hickory, NC
- Easy
- Less than 15 mins
-
Socket set, Wrench set
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c
... Read more
ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Read less
Was this helpful?
Thank you for voting!
Front wheels, too much end play
10 of 38 people
found this instruction helpful.
-
Frederick from BINGHAMTON, NY
- Very Easy
- Less than 15 mins
Shimmed the wheels out on axle.. No more slop.
Was this helpful?
Thank you for voting!