280440C Frigidaire Range - Parts

This is a flat style oven igniter used to light the oven burner in a gas range. When the element in this igniter glows white hot, the gas is released from the safety valves, which lights the oven burner. If your range is not heating properly, or not heating at all, it might indicate a problem with this part. If the element in the igniter ...Read moreis only glowing red or orange, or not glowing at all, it will need to be replaced. This is a shorter style igniter. It is 3.72 inches in length, and it features an 18-inch wire lead. This kit includes the igniter, an instruction sheet, a mounting bracket, and the two ceramic wire nuts needed for installation. This part has an amperage range of 3.2 to 3.6. Unplug your appliance before you start any repair work.

Oven racks can become rusted or damaged from constant use, and need to be properly maintained and cleaned to keep them working properly. If you notice that your oven rack has been damaged or rusted, the rack should be replaced. This oven rack has two anchor points on either side to keep it stable and secure within the oven. This ensures t...Read morehat your food stays in place when baking, and allows you to remove pots and pans without the threat of the entire rack falling out in the process. This metal oven rack measures 16 inches long x 23 inches wide, and is sold individually.

This is a burner grate for your surface burner, and it is compatible with your range stove top. The purpose of this part is to provide a balanced and stable surface for you to set your cookware on while cooking on your stove. The color of the burner grate is black, and it has a diameter of 6.5 inches. This part is sold individually and in...Read morecludes only one round gas grate per package. The most common reason for needing to replace this part is if your current burner grate has incurred damage from daily usage.

This part establishes and maintains the internal temperature of the oven cavity.

This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.

This is a front burner assembly for the stovetop on your range. It delivers the gas to the main cooking area by dividing it through the slots or holes in order to create an evenly burning flame. Take note that this is a front burner assembly. If you are looking to replace your rear burner assembly, see that in the related parts section. This model is roughly 8 inches long, 4 inches wide, and 4 inches thick.

Sold Individually.

his oven door handle is for ranges. Wear work gloves to protect your hands when installing this part.

This main top assembly is located on top of your range/oven to protect and house the burners. The main top also acts as a stable surface for cookware and cooking dishes. If your main stop is off balance and lacks stability or you have observed discoloration, replacing this part could solve the issue. Remember to allow your range to cool d...Read moreown before starting this installation project. Refer to the manual provided by the manufacturer for installation instructions and accurate guidance.

This gas range rear burner assembly delivers a steady and even flame for cooking, helping ensure consistent heat performance on your cooktop. Designed to mount directly to the stovetop surface, it supports reliable ignition and proper gas flow. Replacing a worn or damaged burner can resolve issues such as uneven heating, weak flames, or ignition failure, restoring smooth operation.

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.