26512 Kohler Engine - Parts

Hose clamp. This clamp replaces 25 237 14-S

This item has been OEM sourced to ensure quality. The gasket is intended to be used with lawnmower engines from Kohler, MTD, Ryobi, and Yard-Man. The gasket is used to seal the connection between the exhaust pipe and the cylinder assembly. The exhaust manifold gasket is priced as a single item.

This is a genuine OEM sourced part which is made for use with Kohler engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a faulty breather hose that was installed on a new unit. The part allows the air in the tank, please make sure to refer to the appropriate diagrams of your model for ...Read morethe correct location and application of this component. This high-quality item is made of durable rubber and is sold individually. Keep in mind the hardware to secure it is sold separately.

Fuel Shut-Off Solenoid Repair Kit. Kohler has re-designed this kit. The part was re-designed and replaces the older single wire solenoid.

This is a genuine OEM sourced part used on many small engines. The Kohler reed retainer is constructed of metal, and is designed to hold the breather reed. The reed retainer is sold individually. A wrench is necessary for the proper installation.

Carburetor bowl replacement kit

Sourced directly from the manufacturer, this 6mm Flat Washer is made of durable dark grey metal, is not part of a kit or assembly, and is sold individually. This part should be replaced when it is damaged, worn, or can no longer spread the load under a bolt sufficiently. This Washer is found in various locations, depending on your model. Customers rate this repair as Easy.

It is a genuine item that is supplied by the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. The purpose of this cleaner is to ensure that the air that goes through the unit is free of dust and other harmful contaminants, please make sure to refer to the appropriate diagrams of ...Read moreyour model for the correct location and application of this component. Keep in mind this high-quality air cleaner element is sold individually.

This is an authentic replacement part that is supplied directly from original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. The ignition module also is known as armature-magneto provides electric current for the ignition system by producing pulses of high voltage for the spark plugs. I...Read moret is made of high-quality metal with a rubber insulated wire and it is sold individually, the spark plug boot is included.

This is an original Kohler replacement part manufactured for use with small engines. The float fits inside the carburetor bowl that fills with fuel to be fed into the chamber to mix with air. As fuel is drained from the bowl the float lowers which opens a valve to re-fill the bowl. This float is available individually, please note the valve is available separately.

This low-permeating fuel hose is a genuine OEM replacement designed for use on small engines. It carries fuel safely and efficiently from the tank to the carburetor while minimizing fuel vapor loss and resisting degradation from modern gasoline blends. Made from durable, fuel-resistant material, it’s intended to be cut to length during in...Read morestallation and is an ideal replacement when original fuel lines become brittle, cracked, or start leaking, helping restore safe and reliable engine operation.

Throttle Cable Clamp