260PRO (260 Pro) Poulan Chainsaw - Parts

This check valve, also known as a one-way valve, is a genuine OEM part that regulates the flow of fuel/oil in the equipment engine to prevent it from flowing backwards. It is made of plastic and designed for use in a variety of lawn and garden power equipment. If the valve is jammed, worn down, or contaminated with dirt and debris, it wil...Read morel be unable to open and close properly, thus restricting the flow of fuel and compromising the engine combustion process. You will likely notice fuel leaks around the carburetor, engine stalling, hard starting, and overall lower performance from your equipment. To remove the faulty valve, carefully disconnect any hoses or fasteners connected to it. Place the new valve in position and secure it appropriately.

This is an authentic OEM sourced part that is intended to be used with chainsaws from Poulan, Husqvarna, and Jonsered. Overtime ethanol in gasoline can deposit residue in the carburetor, and it can eventually become clogged and will cause engine performance issues. The kit includes the recommended parts to be replaced when cleaning and re-building a damaged carburetor.

This replacement screw is a high quality hardware that is designed for use with Paramount, Poulan and Weed Eater power equipment. It has multiple applications depending on your equipment, please make sure to check appropriate diagrams for correct location and use of this item. One durable hex socket head screw is included per order.

The oil pickup assembly transfers oil between the tank and the oil pump. This is a genuine Poulan and Jonsered replacement part for use in chainsaws. It is made out of rubber with a metal spring. If this part becomes broken it will need to be replaced. A screwdriver and a set of pliers may be needed while replacing this part which is sold individually.

The spike is designed to provide a tight grip on the material when performing a cutting job. This is a genuine manufacturer-supplied component that is made for use with Poulan, Husqvarna and Jonsered chainsaws. It is a high-quality replacement for a missing or a damaged part that was installed on a new unit. To ensure the proper replaceme...Read morent and the correct application, check the owner's manual and the diagrams for your model. Note, one durable metal spike and two screws to secure it are included. A screwdriver will be needed to repair this component.

This is a genuine replacement part for Craftsman chainsaws. The bar bolt is designed to sit behind the bar mounting plate and gives a location for the bar to fasten to. The bolt is made from high-quality metal. Note you require two bolts to fasten the bar. This item is sold individually.

This red and black OEM switch is an important component of your handheld lawn and garden equipment, allowing you to easily turn it on or off. The specific location of the switch can vary depending on the model and make of your machine, so it is advisable to consult your user manual for guidance. As the switch is used over time, it can wea...Read morer out and potentially fail. If the switch is broken, you will not be able to start your machine, and you must replace it immediately. To remove the switch, you will require either a screwdriver or needle-nose pliers. If the switch housing is secured with fasteners, unscrew them first. Then carefully pry the switch out of its housing and disconnect the attached wires. Please note that this switch is sold individually.

This is a genuine OEM sourced replacement screw designed for use with Husqvarna and Poulan chainsaws. This screw has multiple applications depending on the tools model. Please make sure to check appropriate diagrams for correct use and location of this hardware. Keep in mind, this Torx screw is sold individually.

This is an original replacement part manufactured for use with chainsaws and leaf blowers. The washer is commonly used to disperse the pressure put on the flywheel by a nut across a wider surface area. This washer is available as an individual replacement part, please see model diagram for associative parts.

This worm gear spacer is an OEM direct from Craftsman. Constructed of metal, this part is compatible with many chainsaw engines. The spacer is fitted on the end of the crankshaft, and has been designed to drive the oiler. Although this part is sold individually, it is often found in oil pump assemblies. A screwdriver and a wrench are helpful in the replacement.

This authentic manufacturer-sourced component is specially designed for Poulan and Husqvarna gas-powered chainsaws. It is an identical replacement for a missing or a damaged retainer that is utilized to secure the piston pin. To ensure the exact location and the correct application of this product, refer to the appropriate diagrams for yo...Read moreur specific model. Keep in mind this high-quality hardware is made of durable metal and is sold as an individual item.

This is a genuine OEM sourced replacement tapping screw which is specially designed for use with Paramount and Poulan lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to refer to the appropriate diagrams for the correct location and application of th...Read moreis part. This high-quality hex socket head screw is made of durable metal and it is sold individually.