25A-51 Edger - Parts

Boost the performance of your lawn and garden equipment engines with this Craftsman Fuel Tank Kit. Providing crucial functionality this fuel tank safely stores the necessary gasoline for your engine to operate. For safe installation it is advised to work in a well-ventilated area drain the existing fuel from the previous tank and remember...Read more to disconnect the spark plug wire before commencing the repair. Ensure a smooth-running engine with this dependable brand-approved kit from Craftsman. Keep power flowing smoothly to your outdoor appliances for optimal gardening tasks. A must-have for anyone seeking top-quality Craftsman parts for their garden power equipment.

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

This foam air filter in your lawn equipment serves as a protective barrier, preventing dirt, dust, and debris from entering the combustion chamber. Clean air is crucial for efficient fuel combustion. Typically located in the air intake system, a dirty, damaged, or torn air filter indicates the need for replacement. If you have trouble sta...Read morerting, reduced power, or rough operation, it may be due to a compromised air filter. To replace the air filter, unscrew the knob on the housing cover, swing it out, and remove the old filter. Consult the user guide for installation instructions. Before adding this to your cart, please be aware that this OEM replacement part is sold individually.

This Edger Blade is a black, metal blade which is sold individually and comes certified from the manufacturer. Installation is rated as "Easy" and requires a socket set and wrench set. This blade attaches to the drive shaft and is used for edging the grass around driveways and walkways. If this part becomes worn/fatigued/damaged (which ma...Read morey happen after hitting the pavement) you will notice an odd vibration and poor trimming, at which time the part should be replaced.

Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also be called a Flange Lock. This nut is designed to lock in place, preventing vibrations and other parts coming loose. This nut may be locate...Read mored in multiple locations on your machine, refer to your owners manual to determine if this is the correct part. You will need a wrench or socket set and a torque wrench to complete this repair. You should only torque the nut to the manufacturer recommendation, no tighter. You will need to replace this part when it is worn or damaged. While this part can wear through regular use, it is most commonly damaged through improper use of a wrench or socket. Customers describe this repair as Easy.

Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when properly threaded. It is sold individually, not as part of a kit or assembly. It is black, made of metal, and is found in a variety of locatio...Read morens. Refer to your owners manual to determine if this is the correct part. This part will need to be replaced when it is weak or broken. The symptoms experienced when this part breaks will depend on its location. You will need pliers to complete this repair. Customers rate this repair as Easy.

This Switch is a black, plastic on/off switch for a trimmer. Installation of this manufacturer-certified switch is rated as "Easy" and requires a screwdriver, wrench set and socket set. Refer to your make, model, and diagrams to ensure this switch is correct for you.

This authentic OEM bearing measures 0.62 inches inside diameter, and 1.38 inches outside diameter, and is 0.436 inches thick. Silver and balck in color and sold individually, the bearing is comprised of steel and rubber. This bearing allows the input shaft to rotate freely inside the gear box, and over time can become worn or damaged. Y...Read moreou will know your bearing is damaged if it is making a growling, grinding, or squealing sound. This is an easy repair, and requires a bearing puller tool to carry out. Locate the bearing inside the gear box on each end of the input shaft, ensuring you have confirmed this is the part you need by verifying your model number or using your owners manual.

Introducing the Troy-Bilt Carburetor with primer: specifically designed for efficient high-performance line trimmers. Expertly constructed with quality in mind it optimizes the air and gas mixture before the fuel enters the engine improving the overall performance and reliability of your Troy-Bilt trimmer. Installing it is simple; however...Read more it is suggested to use work gloves for safety and execute the repair in a well-ventilated area. Enhance your line trimmer's performance and longevity with this top-of-the-line Troy-Bilt carburetor.

This Star Knob, which may also be simply referred to as a Knob, is sourced directly from the manufacturer for use in lawn mowers and snow blowers. This part provides a quick-release for handles to fold down, and connect upper and lower handles. It is made of metal, is black, is not part of a kit or assembly, and is sold individually. Th...Read moreis part will need to be replaced if it has become cracked, worn, or damaged. The most common cause for this part needing to be replaced is worn or stripped threads no longer being able to grip. You will need a wrench or socket set and a torque wrench to complete this repair. It should be torqued to the manufacturer's recommendation. Customers rate this repair as Easy.

The Belt Guard is used to protect you from harm against the rotating belt and shaft. This metal part is rated as "Easy" to install and requires a socket set, and wrench set. It attaches to the spindle plate assembly. If there is visible damage, the part should be replaced.