2588 Graco Sprayer - Parts

The Filter Cap is a silver, metal cap which is rated as "Easy" to install. It attaches on the diffusion tube and mesh filter, in order to prevent debris from entering. If broken it will clog, causing spray issues. If broken, damaged or worn out it should be replaced. Refer to your make, model and diagram to ensure this part is right for you.

This is a label used to display the functionality of various electric airless paint sprayers. This label reads: Pro Connect, which is a function within the spray gun of the compatible sprayers. This label measures approximately 4-inches long and 1-inch wide and is a genuine OEM label that can directly replace the label on your machine if ...Read moreit is missing or damaged. This label is meant to be displayed on the drive cover of the paint sprayer and can be replaced easily with no tools at all. To replace this label, remove the old label (if applicable), and clean the area on the drive cover of your sprayer to remove any residue. Install the new label with evenly distributed pressure, to ensure adequate and even adherence.

This OEM label refers to the SmartControl feature which is available on certain models of Graco sprayers. It is a flat, rectangular label measuring 6.25 inches by 3 inches.

This authentic item is supplied directly from the original equipment manufacturer for use with Graco paint sprayers. The hose attaches to the nipple. A wrench set may be necessary during the installation of this part. It is made out of metal and will need to be replaced if it breaks or leaks. This item is sold individually.

This transducer is sourced from the original manufacturer for use in paint sprayers. The transducer, also known as a pressure transducer or pressure sensor, is responsible for monitoring and measuring the pressure of the paint being sprayed. The transducer then relays this information to the control system which allows the sprayer to rema...Read morein in the desired spray parameters and prevent over pressurization. Transducers can fail due to electrical issues, or mechanical damage, which can cause inaccurate pressure readings, loss of control, inconsistent spray patterns, poor paint application and fluctuating pressure rates. To remove a faulty transducer first, disconnect the electrical wires and fasteners holding it in place. Position the new transducer in the empty slot and reattach the electrical connections and any mounting hardware to complete your repair.

This replacement gear case insulator is supplied directly from the original equipment manufacturer for use with Graco sprayers. It is an identical substitution for a worn or missing filter that helps to remove the dust and other harmful contaminants from the material. Please make sure to refer to the owners manual for the correct applicat...Read moreion of this component. Keep in mind this high-quality 60 mesh filter is made of durable material and is sold individually.

This is an authentic OEM component from Graco. The o-ring packing is compatible with many paint sprayers, and is sold individually. The rubber ring helps to secure the fitting and the hose. You will need a socket set, pliers and an Allen wrench.

This is a genuine Graco replacement part. The two position switch is designed for use in airless sprayers, This part includes the high quality plastic outer knob, the plastic inner switch that interacts with the valve in the filter base, and a metal grooved pin. You may require pliers when replacing these items.