250-586-059 (1990) MTD Edger - Parts

This upper discharge chute directs snow or debris away from the machine to maintain safe, efficient operation and reduce clogging during use. Molded from durable plastic, it is designed to withstand cold temperatures and regular impact from snow or material flow while maintaining proper discharge direction. Ideal for replacing a cracked, ...Read morewarped, or missing chute, this component helps restore consistent material flow, improve performance, and ensure safe operation of outdoor power equipment.

This lower discharge chute is designed for snow blowers to direct snow safely and efficiently away from the machine during operation. Made from durable, impact-resistant plastic, it supports smooth discharge flow and withstands cold-weather use. It’s a practical replacement for restoring proper snow-throwing performance when the original chute is cracked, worn, or damaged.

A shoulder bolt, also known as a shoulder screw, has a cylindrical section between the threaded portion and the head, and can act as a pivot point or shaft for bearings and bushings. This shoulder screw measures approximately 2-inches in length, with 1.53-inches of that being the shoulder section and features a .374-inch diameter. This sc...Read morerew is made of high-quality metal and is sold as an individual part. This shoulder screw is compatible with several different makes and types of lawn equipment and is a genuine OEM part. If you notice any damage, or excessive movement or looseness from this screw, it needs to be replaced. Depending on your make and type of equipment, this screw will be installed differently, but you only need a wrench to unscrew it.

This is a genuine part which is supplied directly by the original equipment manufacturer and is used with MTD edgers. The V-belt connects the engine pulley to the transmission pulley to propel the unit forward. This part is made of rubber and is sold individually. For this repair you will need a screwdriver, a socket wrench, and a pair of...Read more needle nose pliers to aid you. Be sure to remove the spark plug and boot on the unit to avoid premature starting.

This OEM Hex Nut is a gold colored, metal, 3/8 x 16 part, sold individually. It is installed with a wrench, or socket and torque wrench, by torquing to the manufacturer specfications, and is used to secure parts in place. You will know it is broken when you see the nut has damaged threads or rounded off edges, which can happen due to fa...Read moretgiue. If it is damaged, it should be replaced. This part can have different uses and different degrees of difficulty depending on the part the hex nut is securing, but generally the replacement of this part is an easy job.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with tillers, edgers, and snowthrowers. The durable metal slide shoe connects to the bottom of the frame and is used to protect the frame and allow the machine to skid over the ground. A screwdriver and wrenches may be needed to install this item. The slide shoe is available as an individual replacement part.