24AF550C000 (2003) Yard Machines Log Splitter - Parts

This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent the nut from backing off and becoming loose on the pulley shaft, and is attached to the drive belt pulley assembly. You will know if you nee...Read mored this because your owners manual will specify it, or the model number of your machine will correspond with this part. If the part is broken due to fatigue, the shafts will free spin when they should be locked together, and must be replaced.

This genuine manufacturer-sourced component is specially made for use with MTD and Troy-Bilt log splitters. It is an identical replacement for a missing or a faulty coupling that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep ...Read morein mind this high-quality part is made of durable metal and is sold individually. Note, the other #718-04392 Coupling, . 500 is sold separately.

This special jam nut is sourced directly from the original equipment manufacturer for use with MTD and Ryobi lawn and garden equipment. It is a standard hardware which has multiple applications depending on your tool, please refer to appropriate diagrams for correct location and use of this part. It is made of high-quality metal and it is sold individually.

This hex bolt is a genuine OEM fastener used in various lawn and garden equipment and machinery. It has a hexagonal shaped head, with a diameter of 3/8 inches. The bolt shaft is 1.5 inches long with 24 threads per inch. The hexagon shape makes the bolt easier to grip and tighten using a wrench or a set of pliers. Over time, it is normal f...Read moreor the bolt to crack, corrode, or for the shaft threads to wear down. Inspect all the bolts on your equipment and replace all those that show visible signs of wear. Use a socket wrench to remove the faulty bolt(s) and thread the new one into position. Each bolt is sold individually. Secure it with a wrench or pliers and be careful not to over tighten as this could damage the bolt and equipment.

This Cotter Pin is a silver 5/32x1-1/4 metal part, sold individually and certified by the original equipment manufacturer. It connects to the axel shaft after the wheel and washer have been installed but before the hub cap. It is used to prevent the wheel from falling off, and if it breaks (due to fatigue) the wheel will fall off. Check...Read more your model number for the correct size of replacement cotter pin to know you are ordering the correct model. This is a one-time use product, which should be replaced during any other repair in which it is disturbed or dislodged.

This is an authentic replacement part, sourced from the original manufacturer for use with hydraulic log splitters. The metal nipple pipe is commonly used to link the hydraulic cylinder and the control valve. This nipple pipe is available as an individual replacement part, please see model diagram for associative parts.

An authentic replacement component which is supplied directly from the original equipment manufacturer for use with Troy-Bilt and MTD log splitters. This is the flexible coupling which is attached to the gear pump, please make sure to check appropriate diagrams of your model for the correct location and use of this item. Over time the par...Read moret may wear out and begin to fail eventually requiring replacement to maintain peak performance. It is a high-quality component which is made of durable metal and it is sold individually.

This OEM flexible coupling connects the engine shaft to the hydraulic pump shaft in your lawn equipment to transfer power. It has a 1/2-inch inner diameter and a 3/4-inch outer diameter. Typically located in the power transmission system, a broken coupling can cause excessive vibration, unusual noises, or shaft misalignment. A broken coup...Read moreling may have physical damage like cracks or tears. Failure to replace a broken coupling can lead to further equipment damage, accelerated wear, and potential failure of connected parts. To remove the flexible coupling from your machine, you need to remove its retaining clips or fasteners with pliers or a screwdriver and detach the coupling itself afterward. You may need to apply lubricant on it if it is stubborn. This replacement part is sold individually.

This hydraulic filter housing kit is designed to protect hydraulic systems in outdoor power equipment by filtering out debris that can cause wear or damage. Supplied as a complete kit with the necessary components, it helps maintain proper hydraulic flow and supports long-term, reliable operation. It’s a practical replacement option for preserving hydraulic system performance and reducing the risk of costly repairs.