24A-464C731 Chipper Shredder - Overview

The Chipper blade attaches to the impeller and is used for cutting. Installation is rated as "Easy" and requires pliers, a socket set, wrench set, and allen wrench set. A dull blade must be sharpened or replaced. If the blade is warped or damaged, this OEM part will be the right replacement if recommended by your owner's manual.

This manufacturer certified flail blade is a metal blade used to shred or cut lawn and garden debris. If the blade becomes dull it should be sharpened or replaced, depending on the extent of the damage or warping Installation is rated as "Easy" by customers and requires a hex key and wrench. This blade attaches onto the impeller assembly.

It is a genuine item that is supplied by the original equipment manufacturer for use with garden chipper-shredders. This special pin clip helps to secure the blade-flail. If the part is missing or is damaged, this will provide an identical replacement for the pin clip that was installed on a new unit. To ensure the exact location and the ...Read morecorrect application of this hardware, refer to the appropriate diagrams for your model. Keep in mind this high-quality pin clip is made of durable metal and is sold as an individual item. You may need a screwdriver and pliers to perform this repair.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This is a genuine OEM sourced replacement part, not an aftermarket imitation. It is specially manufactured for use with MTD and Troy-Bilt chippers and shredders. This special flat head screw is generally used to secure the chipper blade. It has a hex socket head and it is sold individually.

The Push Cap is a black plastic cap which secures to the end of a shaft to prevent injury. It can be installed with a hammer and is rated as "Easy" to install. If the part appears damaged or worn down in a way that could cause injury, it should be replaced. Refer to your make, model and diagrams to check if this is the right part for you.

This genuine OEM supplied part is specially designed for use with a variety of lawn and garden equipment. It is a standard hardware which may have multiple applications. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct application of this part. This is an identical replacement for ...Read morea missing or a damaged flange lock nut that was installed on a new equipment. One durable metal part is included. A wrench will be needed to secure or remove this hardware.

This is a genuine item that is supplied by the original equipment manufacturer for use with MTD, Troy-Bilt and Yard Machines chipper-shredders. It is an identical replacement for a missing or a faulty pin that helps to secure the #911-0833B Pin-Clevis<...Read more/a> that is sold separately. Keep in mind this high-quality part is made of durable metal and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware.

Read less

This OEM Top Locknut measures 5/16x18, is made of metal, and it isused to secure parts in place and prevent backing out from vibration. Replacing this part varies in difficulty depending on the part it is securing and the equipment in question, but it is generally an easy job according to our customers. Installation requires a wrench or socket.

This part is an OEM sourced directly from the manufacturer for use in lawn tractors made by Ryobi, Yard Machines, MTD, Bolens, Yard Man, Troy-Bilt, Poulan, and Cub Cadet. The flat washer attaches to the bearing cup. When replacing this item a wrench might be required during the installation process. Over time this part may break or bend a...Read morend will need to be replaced. This item is made out of metal and is available individually.

The washer attaches to the double pulley. It is made of metal and is sold individually. This is a genuine MTD, Troy-Bilt, Yard Man, and Cub Cadet part sourced directly from the manufacturer for use in tillers, edgers, chippers, and lawn mowers. A wrench might be required during the replacement of this part. It may become broken and will need to be replaced.