My Orders
2487 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Soleniod Valve Failed
-
BOB from LAKE HAVASU CITY, AZ
- Difficult
- More than 2 hours
-
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
The refrig. Is about 30 years old. The new solenoid looked and mounted nothing like the original. I driled holes in the frig and attach the solenoid with sheet metel screws. There were not enough fittings and hoses so I bought a braded metal hose to attach the ro line and the valve inlet. I used the parts in the kit to attach the
... Read more
water feed line. To the ice maker I did not try to stuff all the hoses and lines back into the cramped cavity in the frig. W ell how does it look? The solenoid sticks out a little and there are a lot of hoses behind the frig. I do not spend much time behind the frig so who cares. The ice maker is making ice!
Read less
Was this helpful?
Thank you for voting!
Loud, non-rythmic clicking noise shortly after the compressor comes on, continuing for several seconds.
-
PHILLIP from SUN CITY CENTER, FL
- Easy
- More than 2 hours
-
Nutdriver
Replaced the "Run Capacitor. The non-rythmic clicking associated with the compressor coming on continues. The problem was obviously not the Run Capacitor". I don't know what to do next. Any suggestion would be appreciated.
Thanks,
Phillip
Thanks,
Phillip
Was this helpful?
Thank you for voting!
Fan motor stopped working
-
john from white pine, TN
- Really Easy
- More than 2 hours
-
Screw drivers, Socket set
Well I could what laid on the floor and replaced it but I didn't I emptied refrigerator laid it over change the motor then stood it back up actual work about three hours
Was this helpful?
Thank you for voting!