2466 - Overview

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the ...Read morenut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

The Lever and Knob Assembly (or Front Wheel Height Adjuster) is used to adjust the front height of the mower, and attaches on the front wheels. It can be installed using a socket set and wrench set, and is rated as "easy" to install by our customers. If broken or damaged (likely due to general wear over time) you will no longer be able to...Read more move it to make adjustments, and the part should be replaced. This black, plastic part is sold individually. Refer to your make, model and diagrams to ensure this part fits your machine.

The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of metal. If this item becomes broken or stripped it will need to be replaced and may require a socket set during the installation.

This Genuine OEM latch assembly is designed for use with select Poulan lawn tractors and is sold individually. Constructed from a combination of durable metal and plastic, this component is engineered to secure the discharge chute to the mower’s chute adapter, ensuring a stable connection when using a mulch or bagger system. Proper instal...Read morelation of this latch helps maintain efficient grass collection and safe mower operation. The latch is fitted onto the bagger chute adapter and may require a wrench and screwdriver for removal and replacement. For best results, refer to your equipment’s specific manual for detailed repair instructions and compatibility. Replacing a worn or broken latch ensures a secure fit and reliable performance during mowing.

Introducing the Poulan 42" Stamped Deck Mulch Cover Assembly, an integral part designed to deliver robust and reliable performance. Specifically manufactured for the Poulan 42" stamped deck, it's significantly valuable for effective mulching operations. This product adeptly seals the underside of your mower to prevent cut grass from sprea...Read moreding, assisting you in achieving neat and clean yards. This robust cover is known for its precise fit and finish, ensuring prolonged usage. Adorned with superior durability, it stands as the perfect choice for your Poulan machine. Enjoy a detailed lawn mowing experience with this mulch cover designed to heighten your mowing machinery's functionality.

Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft. If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damag...Read moreed, it will need to be replaced. Refer to your owners manual to determine the exact location of this part. Customers rate the difficulty of this repair as Medium.

This is mulching blade is specially designed for use with Craftsman riding lawn mowers/tractors. Mulching blades are shaped to keep the grass under deck for longer allowing it to be cut into smaller pieces. This provides natural mulch for your lawn since smaller clippings will decompose quicker, releasing their nutrients into the soil. It...Read more is made out of metal and it is sold individually. To install this mulch blade you would need a socket wrench. • Park the riding lawnmower on a flat surface such as a garage floor or a driveway • Disengage blades by pulling the cutting deck lever fully to the disengaged position • Set the riding lawnmower cutting deck to the highest position to access blades • Unscrew the blade bolt • Remove old blade and secure a new one in place • Reassemble in reverse order and test your new blade

This genuine OEM carriage bolt is used to secure various parts in lawn and garden outdoor equipment. The bolt has a round head with a square area underneath it that prevents the bolt from turning and coming loose when it is installed. The bolt shaft has a diameter of 5/16 inches, with 18 threads per inch and the threaded portion of the bo...Read morelt is 0.62 inches long. If the bolt is corroded, the threads are worn down, or the head is damaged or deformed, you will need to replace the bolt to keep your equipment parts secured and functioning efficiently. To replace the bolt, first remove the nut using a wrench or socket. Once the nut is removed, you can unthread the bolt. Insert the new bolt in position, thread the nut on and use a wrench to tighten it. Be careful not to overtighten the bolt to avoid damaging it or stripping the threads. This carriage bolt is sold individually.

This replacement mulching blade is supplied directly from original equipment manufacturer for use with riding lawn mowers. Mulching blades are designed to circulate the grass longer so it can be cut into smaller pieces. This makes the grass clippings a better mulch that will decompose quicker releasing their nutrients into the soil. This blade is made from durable metal and it is sold individually.

Used for quick release of components, such as handles, this 3 Arm Thumb Screw is a manufacturer-sourced replacement part for hundreds of models of blowers and chippers. It is made of plastic and metal, is not sold as part of a kit or assembly, and is sold individually. This part is known to wear over time. If the threads become stripped...Read more, the handle is visibly damaged, or you can no longer tighten or loosen it, you will need to replace it. No tools are required to complete this repair. Customers rate this repair as Easy.

This is a genuine OEM sourced replacement part that is intended to be used with walk-behind lawnmowers from MTD, Yard Machines, Bolens, and Yard-Man. The wheel attaches to the height adjustment plate at the front of the mower. The wheel is used to provide traction to allow the mover to move across the lawn.