24666SE Craftsman Miscellaneous - Overview

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the ...Read morenut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

This part is sold individually and is made of metal. The single blade goes between the blade adapter and the washer. A wrench set may be required to replace this item. It will require replacing if it breaks. This part is an OEM sourced directly from the manufacturer for use in lawn tractors and rear engine riders made by Murray.

This is a genuine replacement part sourced from the original manufacturer for use with riding lawnmowers. The mulcher plate is used to block the mower deck\\\'s discharge port to keep grass clipping in the deck to be cut into fine pieces. This item is available as an individual replacement part, please see illustrated diagram for related parts.