245E Husqvarna Brush Cutter - Parts

This is a genuine Poulan, Husqvarna and Jonsered part for use with Chainsaws.The Recoil starter pulley spins the flywheel to start the engine. This part is sold individually. The most common reason for replacing the starter pulley is when it is broken or stuck, causing the rope to not rewind and the engine to not start. The tools that you...Read more will need to replace the starter pulley are a Torx head screwdriver and needle-nose pliers.

This OEM locking pin is found in your handheld lawn equipment to hold a part, such as a cutting head, spool, or guard, in place and keep it from coming in loose while you are using your machine. If the pin is broken, the component it is supposed to be securing will become wobbly and loose, which can cause your machine to malfunction. To r...Read moreemove a broken locking pin, you can use pliers or a small screwdriver to pull it straight out of the hole. If the pin is stuck, you may need to wiggle it back and forth gently while pulling on it. Take into consideration that this part is sold individually, so refer to your instruction manual to confirm how many of these pins your machine will need.

The handle attaches to the clamping sleeve and is made of plastic. This is a genuine Husqvarna and Jonsered replacement part for use in trimmers, saws, and brushcutters. This item is available as an individual replacement part. During replacement, it may require a wrench to help install this part correctly. Over time this part may break and will need to be replaced.

This is a genuine replacement part sourced directly from the manufacturer. The nut is commonly found in yard tools from Husqvarna, such as trimmers, edgers, and brushcutters. This part is a square metal nut, which is generally used to help secure the handle assembly. Please be aware that there are different nuts used in the machine. R...Read moreefer to the parts diagram to be sure of ordering the correct part. You may require a wrench when replacing this item. The nut is sold as an individual replacement part.

This is an original Husqvarna replacement part manufactured for use with chainsaws. Some ignition models do not include the spark plug connector also called a spark plug boot, it is recommended to inspect the spark plug boot or replace it when servicing the ignition module. The rubber spark plug connection kit includes the coil spring. Th...Read moree coil spring has a sharp end that pierces the insulation of the ignition module\'s wire, and it is the coil spring that makes contact to the wire. This spark plug connection kit is sold individually.

This is a genuine OEM part. The Husqvarna square nut is compatible with many brushcutter devices. The metal nut helps to secure the suspension guide rail, and is sold individually. A wrench is required for the proper repair.

This throttle catch is an OEM part direct from Husqvarna. Compatible with many lawn and garden tools, this item is sold individually. The plastic component is fitted in the housing, providing the operator control of the engine through the cable assembly. A screwdriver and pliers are most helpful with making the replacement.

This is a genuine OEM part. The Husqvarna gasket is constructed of a cardboard composite, and is compatible with many lawn and garden devices. This part is fitted onto the carburetor assembly. This item has been designed to prevent damage to engine parts and absorb fuel leakage. A screwdriver and a wrench may be needed to make the removal...Read more and replacement. This part is sold individually. It is recommended to refer to engine manual and diagrams for further instruction.

It is a genuine OEM item that is made for use with Husqvarna chainsaws and brushcutters. This is a special component which helps to provide a tight fit between connected components. Over time it may wear out or get damaged eventually requiring a replacement. Make sure to check the appropriate diagrams for your model to ensure the proper r...Read moreepair procedure. It is made of durable material and is sold as an individual item.

This is locknut is a commonly utilized hardware that is specially manufactured for use on Husqvarna handheld lawn and garden equipment such as chainsaws, trimmers and leaf blowers. It has multiple applications depending on the equipment, to ensure correct location and use please make sure to check appropriate diagrams of your equipment. Please note this item is sold individually.