2452 - Parts

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold and to the water dispenser.

This water tubing clamp keeps the 3/16-inch diameter water tubing mounted to your refrigerator. Its purpose is to prevent shifting, kinking, or loosening of the tubing, ensuring a consistent water flow for the water dispenser and ice maker. It is typically located at the back of the cabinet near the inlet valve. If the clamp securing the ...Read moretubing in your refrigerator is not properly secured, it can result in leaks or complete detachment. This poses a risk of water damage to your fridge, flooring, and nearby structures if not addressed promptly. To replace the clamp, refer to your user guide for its location. Then, use a screwdriver to remove the securing screw. Please note that this clamp is sourced directly from the original equipment manufacturer and does not include any additional hardware.

This seal is almost eighteen inches long. It is all white in color and is made of plastic. This seal is used for the rear of the upper crisper drawer's glass shelf of side by side refrigerators.

This ice bin dam is almost seven inches long, and approximately four and a half inches deep. It is all white in color and is made of plastic. This ice bin dam is used with a refrigerator's icemaker assembly.

This crisper drawer front seal is almost nineteen inches long. It is white in color with a metalic decorative strip along the center. It is made of plastic and it has a strip of rubber along the upper edge. This seal is intended for use with top mount refrigerators.