24500 - Parts

This OEM 10-Inch-long by 2-Inch-diameter slim white plastic in-line ice and water filter reduces odor, chlorine, and other chemicals without removing fluoride and its benefits. It also prevents lime scale buildup, which can be harmful to icemakers. It can be used on most brands of refrigerator that have a water filter that is housed in th...Read moree interior part in the back of the appliance. This package includes the filter, brass adaptors, brass sleeves, and nuts. The built-in fitting connects directly to your quarter-Inch water supply line (shut off water supply before installing). It is compatible with either copper or plastic tubing. For optimal performance, the operating pressure should be a max of 125 PSI and the temperature should be 33-100 degrees Fahrenheit. To ensure clean drinking water and proper water flow, change filter every 6 months or 400 gallons.

This genuine item is supplied directly from the original equipment manufacturer for use with Graco paint sprayers. The o-ring fits between the housing and the filter and is made out of plastic. During the installation process, a screwdriver may be needed. This is available as an individual replacement part.

This is a genuine OEM sourced part which is specially designed for use with Graco sprayers. It is an identical replacement for a missing or a faulty threaded deflector that was included with a new unit, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of thi...Read mores component. Keep in mind this high-quality item is made of durable material and is sold individually.

This is the return hose assembly, or return line, which is designed for various models of airless paint sprayers and is sold as an individual part. The return line is designed to allow paint and pressure to be returned into the reservoir, and simultaneously connected to a specific port on the sprayer for a continuous paint cycle. This ret...Read moreurn line is comprised of a high-quality rubber and metal pump attachment at one end and a metal tube and plastic reservoir attachment at the other end. Depending on your model, you may need a set of pliers or a wrench to disconnect and remove the old line. Before you replace your old line, it is recommended that you wrap the metal end of the line with Teflon tape to create the best seal possible. When replacing the line, disconnect the sprayer from power and release any pressure in the spray gun by squeezing it until no more pressure is felt.

This transducer is sourced from the original manufacturer for use in paint sprayers. The transducer, also known as a pressure transducer or pressure sensor, is responsible for monitoring and measuring the pressure of the paint being sprayed. The transducer then relays this information to the control system which allows the sprayer to rema...Read morein in the desired spray parameters and prevent over pressurization. Transducers can fail due to electrical issues, or mechanical damage, which can cause inaccurate pressure readings, loss of control, inconsistent spray patterns, poor paint application and fluctuating pressure rates. To remove a faulty transducer first, disconnect the electrical wires and fasteners holding it in place. Position the new transducer in the empty slot and reattach the electrical connections and any mounting hardware to complete your repair.

This replacement gear case insulator is supplied directly from the original equipment manufacturer for use with Graco sprayers. It is an identical substitution for a worn or missing filter that helps to remove the dust and other harmful contaminants from the material. Please make sure to refer to the owners manual for the correct applicat...Read moreion of this component. Keep in mind this high-quality 60 mesh filter is made of durable material and is sold individually.