2447A Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven light receptacle broken - bulb base broke off
69 of 116 people
found this instruction helpful.
-
Paul from Spokane Valley, WA
- Easy
- 30 - 60 mins
-
Screw drivers
Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven,
... Read more
and the new one snapped in easily from inside the oven as well. Replaced wiring, installed new bulb, restored power & tested. Replaced back cover. Good time to vacuum under/behind where the oven usually lives before sliding it back to the wall.
Read less
Was this helpful?
Thank you for voting!
missing oven racks
20 of 25 people
found this instruction helpful.
-
ALLAN from APACHE JUNCTION, AZ
- Really Easy
- Less than 15 mins
order pcs fit perfect.
Was this helpful?
Thank you for voting!
A mouse living in my stove!
15 of 20 people
found this instruction helpful.
-
Amy from Hughestown, PA
- A Bit Difficult
- 15 - 30 mins
-
Screw drivers
One night I found a mouse living in my stove. We found it literally living underneath the top of the stove (the part where the burners are that you have to lift up). The insulation on the inside of the stove was literally covered with mouse poop, dog food, dog treats, and scraps of food among other things. It was totally nasty and I thoug
... Read more
ht we would have to buy a new stove. However, I searched online and found replacement insulation on PartSelects website and ordered it. It was cheap and the fix was removing old insulation, vaccuming out and cleaning the stove then replacing the insulation with the new one. PartSelect had a great price and shipped promptly.
Read less
Was this helpful?
Thank you for voting!
Very old burner grates & drip pans, need replacement.
15 of 23 people
found this instruction helpful.
-
Mariano from Torrance, CA
- Really Easy
- Less than 15 mins
Took out the old & easily replace it with the new set. No tools required.
Other Parts Used:
Was this helpful?
Thank you for voting!
Oven Racks needed to be replaced.
11 of 14 people
found this instruction helpful.
-
Peter from Chicago, IL
- Really Easy
- Less than 15 mins
Slide out the old; slide in the new!
Was this helpful?
Thank you for voting!
original drip pans were rusting on the undersides
9 of 11 people
found this instruction helpful.
-
Sandra from Okeene, OK
- Really Easy
- Less than 15 mins
Just to point out the pans were delivered within a few days which was very quick. I just dropped them in. They fit perfect. Thank You for no stress.
Was this helpful?
Thank you for voting!
Oven light bulb went dark; it needed replacing
10 of 17 people
found this instruction helpful.
-
Lise from CEDAR GROVE, NJ
- Very Easy
- Less than 15 mins
Twisted replacement bulb into place easily. Let there be light!
Was this helpful?
Thank you for voting!
Oven racks rusted
11 of 21 people
found this instruction helpful.
-
Wendell from Ocala, FL
- Really Easy
- Less than 15 mins
Ordered new racks and replaced them.
Was this helpful?
Thank you for voting!
Grates were old and rusted and scratching the bottom of my pots
7 of 9 people
found this instruction helpful.
-
Sue Z from Los Angeles, CA
- Really Easy
- Less than 15 mins
I threw the old ones out and replaced them with the new ones. It was a no-brainer :) The parts arrived super fast. Great, no hassle service.
Was this helpful?
Thank you for voting!
Insulation was missing
8 of 12 people
found this instruction helpful.
-
Bryan from Holland, MI
- A Bit Difficult
- More than 2 hours
-
Nutdriver, Screw drivers
Apparently, the original insulation had been removed due to a mouse infestation-the unit had been in storage for a while. After removing about 50 screws, I had all the body panels off and cleaned out the interior of the stove then installed the new insulation. I put it all back together and hooked it up- works just like new. I only paid 6
... Read more
0 bucks for this oven, so all in all, not a bad deal.
Read less
Was this helpful?
Thank you for voting!
Refrigerator Light bulb went out
7 of 12 people
found this instruction helpful.
-
ANGELA from MEBANE, NC
- Very Easy
- Less than 15 mins
I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.
Was this helpful?
Thank you for voting!
Replace Chrome Drip Pan
4 of 4 people
found this instruction helpful.
-
Mavis from McKees Rocks, PA
- Easy
- Less than 15 mins
No installation steps required. I did have very fast delivery of parts ordered.
Was this helpful?
Thank you for voting!
replacing oven racks
4 of 5 people
found this instruction helpful.
-
Lawrence from Elmira, NY
- Really Easy
- Less than 15 mins
The replacement racks were spot on and the service was outstanding. had the racks in 2 days. Happy Happy Joy Joy! :)
Was this helpful?
Thank you for voting!
Old racks had melted plastic on them.
4 of 5 people
found this instruction helpful.
-
James from PAINESVILLE, OH
- Very Easy
- Less than 15 mins
It was a replace racks not repair. No problem
Was this helpful?
Thank you for voting!
Repaired Oven Range Light Bulb
3 of 3 people
found this instruction helpful.
-
Alan from SAN MATEO, CA
- Very Easy
- Less than 15 mins
-
Screw drivers
The bulb has a plastic clear cover. That cover can just be carefully removed using a screwdriver. It's held in by a metal bracket. After you remove the cover. You'll just need to replace the bulb and then re-install the cover and bracket.
Was this helpful?
Thank you for voting!