2375 - Parts

The function of the grease filter is to trap grease into the filter from the exhaust air. The grease filter is intended to be used with certain downdraft cooktops and ranges. This grease filter is roughly fourteen inches long and almost twelve inches wide, and chrome in color. Removing your old grease filter and replacing it with a new on...Read moree is an easy job, users say it took them less than fifteen minutes to install. We recommend that when removing your current grease filter, you use work gloves to protect your hands and clean the entire area thoroughly before installing the new filter.

This surface burner control knob provides a simple and reliable way to adjust burner heat levels on your range, stove, or cooktop. Featuring a black finish with stainless/chrome trim and clearly marked heat settings from Off to Hi, it is designed to fit securely onto a D-shaped shaft for smooth and precise burner control. Replacing a crac...Read moreked, melted, loose, or worn knob can restore both the appearance and functionality of your appliance while ensuring accurate heat adjustment during cooking. Installation is quick and requires no tools—simply pull the old knob straight off the shaft and push the new knob securely into place. For best results, inspect the burner control shaft and surrounding knobs for signs of wear or damage and replace any worn components as needed to maintain consistent performance. Please note, this part is a replacement for the original and may not be compatible to your unit. Please check model compatibility as well as the shaft of the switch this knob will fit on. Because of the substitution this knob may not work with older units.

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.

This is a push-and-turn switch. This kit includes all necessary hardware to install the part. Switch comes with a D-shaped shaft.

Sold individually. Lock washers are used with screws when vibration from an appliance may cause the screw to loosen. Lock washers are also used in the electrical components of an appliance to ensure an electrical connection is not lost.

This 25-inch fuel line carries fuel from the tank to the carburetor, ensuring proper engine operation. Made from durable clear plastic, it is designed to withstand regular use but may become clogged or brittle over time. Replacing a worn or damaged line can help prevent leaks and restore reliable starting and performance.

This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this essential component ensures clean fuel delivery, protecting the engine from potential damage caused by contaminants. Sold individually, the filt...Read moreer is built to meet original equipment standards for fit and function. Over time, the filter may become clogged, restricting fuel flow and making engine starts more difficult. For optimal performance, it should be replaced—not cleaned—at the first sign of blockage or wear.

This is the Genuine Craftsman replacement part. It is made out of Flexible Rubber and is Sold Individually. The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the carburetor after the primer bulb has been pushed. The excess fuel is forced through the purge line back into the fuel tank. Over time the Tank Purge Line will become brittle and crack and will need to be replaced.

This part is used as a support for the grill element. Sold individually.

This jar is a little over five inches long. It is made of glass and is used for collecting the grease drippings of gas ranges.

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

This motor isolator is less than an inch long.