2265 - Parts

This authentic item is supplied directly from the original equipment manufacturer for use with Murray lawn mowers. The baffle attaches to the housing. When replacing this part a wrench might be required during the installation process. It is made out of a durable material and will need to be replaced if it breaks. This item is sold individually.

This is a manufacturer-approved part which is specially designed for Murray and Briggs and Stratton lawn and garden equipment. Bearings are generally utilized to provide a tight fit between connected components while allowing for movement with minimum friction. If the part is worn, damaged or is missing, this will provide an identical rep...Read morelacement for the original hardware that was installed on a new unit. Note, one durable metal bearing is included. Refer to the appropriate diagrams for your model to ensure the proper repair procedure. A wrench set will be needed to replace this component.

Adapter-blade 7/8x2.3

It is an identical replacement for a missing or a damaged rear guard that was installed on a new equipment. Check the diagrams for your specific model to ensure the correct repair procedure. Keep in mind this high-quality part is made of durable plastic material and is sold as an individual item. This authentic manufacturer-sourced rear guard is designed for use on Murray walk-behind lawn mowers.

Screw.25-20 s-t

This is an genuine OEM sourced replacement bit holder designed for use with screwdrivers. This part provides a grip for holding a bit in a tool. It is made out of metal and is sold individually. Due to prolonged, heavy use a bit holder may need to be replaced eventually. To replace this item no tools are needed.

This is an authentic Murray replacement part that is OEM sourced and intended to be used with walk-behind lawnmowers. The cable includes the knob and is used to engage and disengage the self-propel feature of the mower. A screwdriver and pliers may be needed to install this item. The drive control is sold as an individual replacement part.

This locking caster is sourced from the original equipment manufacturer for use with outdoor grills. It consists of a wheel, with a diameter of 3 inches, and a metal bracket that allows for easy transportation and positioning. It also includes a locking mechanism that prevents unintentional movement of the grill. Over time, the caster may...Read more break, corrode, or fall out of alignment, thereby causing instability, failure of the locking system, and potential accidents. The caster will also need to be replaced if it is jammed or stripped. To replace a defective caster, prop the grill up and use a wrench or screwdriver to turn and remove the caster mounting bolt. Remove any dirt and debris in the area and align the new caster with the mounting hole. Turn the caster until it is firmly locked in place to complete the repair.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal bolt is used to secure the blade to the blade adapter. A hex socket wrench is needed to install this part. This item is available as an individual replacement part.

Genuine OEM replacement This brush is sold individually, 2 are needed for most every electric power tool It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore...Read more a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This is an OEM part source directly from the manufacturer. The blade adapter is commonly found in lawn mowers from Murray. This part is made of metal, and is used to connect the mower blade with the mower deck. You will require a wrench when replacing this item. The blade adapter is provided as an individual replacement part.

Washer.50.99.03 flat