22606 - Parts

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

This bolt is designed for use with various models of lawn and garden equipment and is a genuine OEM part. Featuring a square securing-area underneath the head for locking purposes, this bolt measures .31-inches in diameter and is 18 threads-per-inch. This bolt is made of high-quality metal and may require you to acquire multiple, depending on the use and location of installation for your equipment.

This replacement hardware is sourced from original equipment manufacturer for use with Toro snowthrowers. It is standard hardware which has multiple applications, please refer to appropriate diagrams for correct location and use of this locknut. This part is made from durable metal and it is sold individually.

This replacement flat washer is sourced directly from the original equipment manufacturer, it is specially designed for use with Toro riding lawn and garden equipment. It helps to distribute the pressure evenly between connected parts to ensure a tight fit, please refer to the appropriate diagrams of your model for the correct location an...Read mored application of this hardware. Keep in mind this durable metal washer is sold individually.

This OEM Washer (j.39-2.2 11G Fl), is a silver, metal part, requiring a wrench or socket set to install. Installation is rated as "Easy". This washer can be used as a spacer between the bottom of the blade and the blade bolt. It attaches on the blade bolt to support the blade. If broken due to fatigue/damage, you may hear a rattling sound...Read more underneath the cutting deck and should replace the part. Refer to your make, model and diagrams to check if this model is right for you.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This authentic item is supplied directly from the original equipment manufacturer for use with Murray edgers and lawn mowers. The ring goes next to the flat washer and is made of metal. When replacing this part a set of pliers might be required during the installation process. It may become bent or broken and will need to be replaced. This item is priced as an individual replacement part.

This hex center lock nut is sourced from the original manufacturer for use in lawn and garden power equipment. It is a hexagon-shaped fastener for bolts/studs that is responsible for the keeping the bolt/studs secure during use. The nut is made of metal and has a diameter of 5/16 of an inch and a thread pitch of 18 internal threads per in...Read morech. Over time the threads in the nut can wear down and the nut itself may crack or break. It is important to replace it as soon as necessary to avoid damaging your equipment. Use a socket or wrench to remove the old nut and thread the new one on. Make sure to order the correct number of nuts for your equipment as each nut is sold individually.

This Washer (.40.81 16g Flt) is a black, metal part, requiring a socket set to install. Installation is rated as "Easy". This washer can be used to provide a tight fit between connected components. It attaches onto the bell crank between the adjusting nut and cotter pin. Refer to your make, model and diagrams to check if this model is right for you.

Keep in mind this part is made of metal and is sold individually. The washer goes next to the extension spring. It may require a wrench during installation. Over time this part may break and will need to be replaced. This authentic item is supplied directly from the original equipment manufacturer for use with lawn tractors and lawn mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity.

This replacement wheel and tire assembly is used on Murray lawn mowers. It is supplied directly from original equipment manufacturer and it is sold individually. This wheel helps to support and move mower. This assembly consists of a plastic rim and a plastic tire. This is a simple and quick repair that should only require a wrench. • ...Read more Remove the hub cap and the locknut • Replace the old wheel with the new one • Secure it with a nut and a hub cap

This is an authentic Murray replacement part that is sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal plate connects to the mower's deck to block the side discharge port when using the mower to mulch. This item is available as an individual replacement part.