22308 - Instructions

Installation was straight forward as the new vent cap was sized correctly for exhaust pipe (5 inch). Placed the mounting plate into the exhaust pipe and used 4 SS screws to anchor to house sheathing. The vent flapper was not flat, requiring that I carefully stress relieve it at 250 degrees and hold it flat while cooling to take warp out ... Read more . Snapped it in place afterwards and then bolted on cover.

took the old one out ,poped the new one in, took 2 minutes

Just slipped the part into the electric outlet

Went to U-Tube and watched video. New switch has different wire connection pattern from old and requires some scrutiny as to where the connections are on the new sw.

You need a good flashlight!!

I first thought it was the switch. I ordered one and the wrong one was shipped to me FROM ANOTHER COMPANY. After more trouble shooting I discovered it was the cartridge that needed to be replaces. I ordered one and again, the wrong one was shipped to me. They told me I could not get the right part because they were not made anymore. ... Read more

So, I shipped it back and got in touch with Part Select. They found the right part and shipped it to me in 2 days. Problem fixed with the EXACT right part. I ordered the first part more than two months prior to receiving the correct part from PartSelect. All I had to do was plug it in to the recepticle in the stove. No tools required.

Followed other's instructions from the web site: First - turned off the power at circuit breaker; removed two screws from downdraft vent area; pushed the switch housing back towards vent and lifted; held replacement switch next to defective switch and removed and replaced one wire at a time; loosed switch collar-nut and swapped defective ... Read more switch for new one. Only issue was the "rat's nest" of wires gave very little room to work, especially if you have average sized hands.

I feel that the design of the indicator light, with the base attached to the bottom of the lens, is ingenious in that it eliminates the need for fasteners in that confined space, However, the plastic used for the base needs to be more flexible. Part of the base broke off in trying to force the base over the bottom of the lens. Fortunat ... Read more ely, there was enough left on the base that I could slip it over the bottom of the lens and complete the installation.

Shut off power. Removed screws holding panel.Removed wires from old switch.Installed wires on new switch and reinstalled panel.EASY

Unpacked the new cooktop, plugged the module into the outlet. Done.

Took out the old, Put in the new

Just plugged it in

I decided to remove the original Jenn Air grill from my stove top and replace it with a new Jenn Air radiant Element Cartridge. I searched on Google for 'Jenn Air radiant top' and immediately found just the item on the PartSelect.com website. I placed the internet order that day and two days later -- kaboom - the part has arrived. I pl ... Read more uggedd it into the stove top (no tools needed) and it was better than new. Wow, that's what I call a great experience! Thanks PartSelect. - Sandi Phillips

Repair was very easy for anyone to do,Just lift the old element cartridge up and pull out,And insert new the one! Very simple it took less than two minutes.The New element cartridge(stainless steel) Fits perfectly and functions perfectly.Ordered parts on a Saturday and they arrived Monday! impressive!!

Searched on the Web for the prt number printed on the cartridge itself. Found Partselect, and liked availability, price and delivery.

Replacement was literally a 30-sec task, without tools.

Works perfectly, spousal unit happy, more hot dinners ready when I am!

removed motor, saw that stablizers were broke and went to a local parts supply shop called SUNDBERG and was given a price of about 49.00 for three stablizers. at that point i went to the internet and found PARTSELECT.COM were i found the same parts for a fraction of the price,17.00, i could not believe it! SUNDBERG customer service was h ... Read more orrible.PARTSELECT custormer service is great and was just over the internet,any how the repair is done no more loud noise and wife is happy again ,for awhile.thanks keep up the good work.i tell everybody about you guys.