22302 (1988) Kenmore Range - Parts

The function of the grease filter is to trap grease into the filter from the exhaust air. The grease filter is intended to be used with certain downdraft cooktops and ranges. This grease filter is roughly fourteen inches long and almost twelve inches wide, and chrome in color. Removing your old grease filter and replacing it with a new on...Read moree is an easy job, users say it took them less than fifteen minutes to install. We recommend that when removing your current grease filter, you use work gloves to protect your hands and clean the entire area thoroughly before installing the new filter.

This surface burner control knob provides a simple and reliable way to adjust burner heat levels on your range, stove, or cooktop. Featuring a black finish with stainless/chrome trim and clearly marked heat settings from Off to Hi, it is designed to fit securely onto a D-shaped shaft for smooth and precise burner control. Replacing a crac...Read moreked, melted, loose, or worn knob can restore both the appearance and functionality of your appliance while ensuring accurate heat adjustment during cooking. Installation is quick and requires no tools?simply pull the old knob straight off the shaft and push the new knob securely into place. For best results, inspect the burner control shaft and surrounding knobs for signs of wear or damage and replace any worn components as needed to maintain consistent performance. Please note, this part is a replacement for the original and may not be compatible to your unit. Please check model compatibility as well as the shaft of the switch this knob will fit on. Because of the substitution this knob may not work with older units.

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.

The surface element control switch is an essential component in electric ranges, responsible for regulating the heat output of the surface burner. It allows you to adjust the temperature levels by controlling the electrical flow to the burner. If your stovetop burner fails to turn on, stays on high heat, or doesn’t respond to adjustments,...Read more a faulty switch could be the cause. This switch features a double flat shaft design and is nut-mounted for secure installation. Always disconnect the power supply before replacing the switch to prevent electrical hazards. Ensure compatibility with your appliance model before purchasing.

This wall vent cap kit comes with a spring loaded damper and instructions. It is designed for a 6" diameter outside vent.

This part is used as a support for the grill element. Sold individually.

This wall vent cap kit comes with a spring loaded damper. This part can be painted.

This jar is a little over five inches long. It is made of glass and is used for collecting the grease drippings of gas ranges.

This indicator light kit comes with two red jewel light lenses.

This motor isolator is less than an inch long.

This grease jar lid is used for some of Maytag/Jenn-Air's brands of ranges and cooktops. This lid is not quite an inch high and is three inches in diameter.

This pilot light lens is red and is well under an inch long.