20906 - Parts

This screw is an authentic OEM sourced hardware, it is not an aftermarket imitation. It is commonly utilized on Toro snow throwers. It is a standard hardware which has multiple uses depending on your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. One hex head screw is included per order.

It is an authentic Toro hardware. The thrust washer is supplied from the original equipment manufacturer for use on lawn mowers. It is utilized to provide a tight fit between connected components of the drive wheel mechanism. Unfortunately, over time the material will tend to wear out and the may get damaged eventually requiring a replace...Read morement. To ensure the exact location and the correct application of this item, refer to the appropriate diagrams of your model. Note, one durable metal thrust washer is included. You will need a wrench set to remove the wheel when replacing this hardware.

This friction ring is an authentic item which is supplied by the original manufacturer for Toro lawn mowers. It is one of the special parts that helps to provide a tight seal between components. Over time it may wear out, get damaged or simply lost eventually requiring a replacement. This high-quality friction ring is made of a durable ma...Read moreterial and is sold as an individual component. Note, you may need a wrench set to remove and resecure the hardware that holds this part. Check the diagrams of your specific model for the exact location and the correct application of this hardware.

This is a genuine replacement part manufactured for use with outdoor power equipment. This flanged hex head screw has several applications, please see model diagram for part use and location. This screw is available as an individual replacement part.

This is an authentic replacement part manufactured for use with small engines. The dipstick is used to measure the depth of the oil in the engine. This metal dipstick has the oil fill cap attached, and also included is the cap seal. The dipstick is sold individually.

This durable nylon starter rope is an authentic OEM supplied replacement part that is specially produced for use with Briggs and Stratton engines that are commonly installed on Toro lawn and garden equipment. When the rope is pulled to start the engine, it is returned back into the starter pulley by means of the starter spring. One starte...Read morer rope is included per order, please note the handle grip and other parts are all sold separately.

It is an authentic Toro hardware. The washer-clutch is supplied from the original equipment manufacturer for use on lawn mowers. It helps to engage the pinion gear which is an important component that drives the wheel assembly. If the motor runs but the drive wheel is not spinning, a broken or worn washer-clutch may be the reason. To ensu...Read morere the exact location and the correct application of this item, refer to the appropriate diagrams of your model. Note, one durable plastic washer-clutch is included. You will need a wrench set to remove and resecure the wheel when replacing this hardware.

This authentic item is supplied directly from the original equipment manufacturer for use with engines, outboard motors, portable generators, snowthrowers, and lawn mowers made by Briggs & Stratton and Toro. The o-ring seal attaches to the dipstick. When replacing this part a socket set might be required during the installation process. I...Read moret is made out of rubber and will need to be replaced if it breaks. This part is available as an individual replacement.

This part is an OEM from Briggs and Stratton, Toro for use with lawn and garden equipment engines. The air filter collar gasket seals the gap between the air filter collar and the carburetor. The most common reason for replacing the air cleaner gasket is if it is damaged, clogged, or missing, causing the engine to not start. This part is ...Read moresold individually. The tools that you will need to replace the air cleaner gasket are a 5/16" socket or nut driver and a Phillips head screwdriver.

This is an authentic replacement part manufactured for use with small engines. The gasket is used to seal the cylinder intake. It is recommended to replace gaskets when servicing the engine to ensure proper seals when the parts are reassembled. This gasket is sold as an individual replacement part, please see model diagram for associative parts.

This part is an OEM sourced directly from the manufacturer for use in Briggs & Stratton engines and Toro lawn mowers. The air cleaner screw attaches to the air cleaner. It may require a wrench during installation. Over time this screw may become stripped or broken and will need to be replaced. Keep in mind this part is made of metal and is sold individually.