My Orders
20829 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
the broiler element burnt out
9 of 11 people
found this instruction helpful.
-
Deborah from Cumberland, RI
- Really Easy
- Less than 15 mins
-
Screw drivers
first I unplugged the stove,took the screws out of the pan that holds the element to the stove, then unplugged the element.then I plugged in the new element, then screwed the screws into the pan that holds the element into the stove. it was very easy.
Was this helpful?
Thank you for voting!
Grandson lost the ignition key to my Toro!
15 of 38 people
found this instruction helpful.
-
Michelle from AYLETT, VA
- Really Easy
- Less than 15 mins
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Was this helpful?
Thank you for voting!
Broiler stopped working.
3 of 4 people
found this instruction helpful.
-
DAVID from DAYTONA BEACH, FL
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Indicators showed broiler should be working so basically made a guess that the element was bad and replaced it. Turned off circuit breaker and removed mounting screw and unplugged terminal ends of the element and replaced with new one. Switched circuit breaker on and turned on broiler and my repair was a success.
Was this helpful?
Thank you for voting!
The broil element had burnt into,
2 of 2 people
found this instruction helpful.
-
Don from Hazlehurst, GA
- Very Easy
- Less than 15 mins
-
Screw drivers
Remove three strews and two wires. Less than fifteen minutes for this Seventy Seven year old farm boy!
Was this helpful?
Thank you for voting!
broiler coil burned out
0 of 3 people
found this instruction helpful.
-
randall from sheboygan, WI
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers
removed back plate screw, removed two broiler screws. Disconnected wires in back plate by sliding them off of connectors. removed broiler coil and assembly. Using pliers, bent retaining hooks off of old coil, removed it and replaced it with the new coil. Reversed process.
Was this helpful?
Thank you for voting!
Replace broiler element
-
Hugh from Greenville, SC
- Easy
- 15 - 30 mins
-
Nutdriver
Unscrew and remove old element, install new element.
Was this helpful?
Thank you for voting!