207R Hotpoint Range - Parts

This six inch chrome drip bowl is intended for use with tilt lock style surface mount burner element units.

This 6 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

This 8 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

This eight inch chrome drip bowl is intended for use with with tilt lock style surface mount burner element units.

The broil element is located at the top of the oven and gives off heat in order to bake evenly. If you notice that the element is not heating up or is not cooking evenly it could be because it is broken or burnt out. The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart. Does not include mounting bracket. All...Read more you need for this simple repair is small screwdriver. To complete this repair, you will need to first turn the oven off (or shut off the house circuit breaker), remove the two screws that are holding the old element in place, remove the two wires from the old part, and then connect them to the new part and screw back into place.

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

This surface element kit includes an 8 inch element, two wire, 2350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.

This genuine 6-inch surface heating element provides the heat needed for cooking on compatible electric ranges and cooktops. Designed with a tilt-lock hinge mounting system, it delivers consistent heat distribution for everyday cooking tasks such as boiling, simmering, and frying. Replacing a worn or failed surface element can help restor...Read moree proper burner performance when the burner no longer heats, heats unevenly, or cycles inconsistently. The element features a durable 3-wire design, operates at 240 volts, and delivers approximately 1,325 watts of heating power. Installation typically involves disconnecting power to the appliance, lifting the element from the receptacle, disconnecting the terminal connections, installing the replacement element, and restoring power to test operation. The element measures approximately 14 inches long, 7.5 inches wide, and 2 inches high and weighs approximately 1 pound.

This tilt lock hinge mounted surface element kit includes an 8 inch element, three wire, 2450 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.

The GE Appliances Bake Element is a top-quality replacement part designed specifically for electric ovens. Located at the bottom of the oven, it provides the necessary heat for baking. Its installation can be easily managed by disconnecting utilities and using safety equipment such as work gloves. An important reminder is to disconnect th...Read moree range or deactivate the house circuit breaker for the range before installation to ensure safety. This Bake Unit, featuring 236V L O, is recognized for its compatibility with numerous models, making it a versatile choice. This GE part promises to upgrade your oven's performance back to its optimum condition.

The depth of the terminals is 2.5 inches, and the screw-in terminals are 1.5 inches apart.

This bake element has screw-on terminals.