20743 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No spark
4 of 4 people
found this instruction helpful.
-
Frank from KENOSHA, WI
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set
Found you cannot spin it by hand to find out if you have spark. You have to put the recoil back on and spin it this way to find out you have spark. You have to generate enough rpm to create spark. Run's fine know.
Other Parts Used:
Was this helpful?
Thank you for voting!
Wouldn’t start.
18 of 47 people
found this instruction helpful.
-
Bruce from CARNATION, WA
- Really Easy
- 30 - 60 mins
I installed a new solenoid starter. Took me a total of 20 minutes. Started right up.
Was this helpful?
Thank you for voting!
Muffler rusted out
7 of 18 people
found this instruction helpful.
-
Snoopy from TYRONE, GA
- Very Easy
- 30 - 60 mins
hand tightened with threads into threaded insert
Was this helpful?
Thank you for voting!
Push mower leaked under neath.
1 person
found this instruction helpful.
-
Raymond from Coalport, PA
- Easy
- 15 - 30 mins
-
Pliers, Socket set
Pulled the old seal out, replaced it with seal #391483S and so far looking good !
Was this helpful?
Thank you for voting!