20708 Lawn Mower - Parts

This OEM Washer (j.39-2.2 11G Fl), is a silver, metal part, requiring a wrench or socket set to install. Installation is rated as "Easy". This washer can be used as a spacer between the bottom of the blade and the blade bolt. It attaches on the blade bolt to support the blade. If broken due to fatigue/damage, you may hear a rattling sound...Read more underneath the cutting deck and should replace the part. Refer to your make, model and diagrams to check if this model is right for you.

This belt is an authentic Murray replacement part manufactured for use with walk-behind lawnmowers. The special belt is used to drive the wheels while using self-propulsion. Overtime belts can crack wear out and break, so it is recommended to inspect belts and pulleys as part of regular maintenance. This belt is available individually, please see model diagram for any additional parts.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This authentic item is supplied directly from the original equipment manufacturer for use with Murray edgers and lawn mowers. The ring goes next to the flat washer and is made of metal. When replacing this part a set of pliers might be required during the installation process. It may become bent or broken and will need to be replaced. This item is priced as an individual replacement part.

This hex center lock nut is sourced from the original manufacturer for use in lawn and garden power equipment. It is a hexagon-shaped fastener for bolts/studs that is responsible for the keeping the bolt/studs secure during use. The nut is made of metal and has a diameter of 5/16 of an inch and a thread pitch of 18 internal threads per in...Read morech. Over time the threads in the nut can wear down and the nut itself may crack or break. It is important to replace it as soon as necessary to avoid damaging your equipment. Use a socket or wrench to remove the old nut and thread the new one on. Make sure to order the correct number of nuts for your equipment as each nut is sold individually.

Keep in mind that this part is sold individually. The torsion spring is made of plastic and attaches to the rear door. A screwdriver, a set of pliers, a socket set, and a nutdriver might all be helpful during the installation of this part. It might break or bend over time and will need replacing. This genuine item is supplied by the original equipment manufacturer for use with Murray lawn mowers.

This high-quality replacement assembly is supplied directly from the original equipment manufacturer. It is specially designed for Toro and Lawn Boy lawn mowers. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for th...Read moree correct installation of the new part. Keep in mind this high-quality assembly includes one durable rubber tire and a plastic wheel. Note, the hardware to secure it is sold separately.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Toro lawn mowers. It is an identical replacement for a missing or faulty rope guide that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application...Read more of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an authentic replacement part manufactured for use with Toro snowthrowers. The special hex head screw is used with a variety of different snowthrower models and has multiple applications. This screw is available as an individual replacement part, please see model diagram for associative parts.

This is an authentic Lawn Boy replacement part, sourced from the original manufacturer for use with lawnmowers. The special gasket is commonly used to seal the carburetor connection. It is recommended to replace gaskets when servicing the engine to ensure proper seals when the parts are reassembled. This gasket is available as an individual replacement part, please see part list for associative parts.

This Washer (.40.81 16g Flt) is a black, metal part, requiring a socket set to install. Installation is rated as "Easy". This washer can be used to provide a tight fit between connected components. It attaches onto the bell crank between the adjusting nut and cotter pin. Refer to your make, model and diagrams to check if this model is right for you.

It is a genuine item which is supplied directly from the original equipment manufacturer for use with Toro and Lawn Boy lawn mowers. It is an identical replacement for a missing or a damaged cover for the muffler that was originally installed on a new unit. Please refer to the appropriate diagrams for your model to ensure the correct repair. Keep in mind this durable part is sold individually.