2061 - Parts

This is a genuine replacement part manufactured for use with outdoor power equipment. This flanged hex head screw has several applications, please see model diagram for part use and location. This screw is available as an individual replacement part.

This blade is an authentic Murray replacement part. It is compatible with over 150 models of lawn mowers. There are several simple steps which can be followed to replace this part. You will need a wrench to complete these steps. - Remove the spark plug wire - Wedge a board in the mower to stop the blade from turning - Remove the blade bo...Read morelt and washers - Remove the old blade - Place the new blade on the shaft - Install the washers on the shaft - Tighten the blade bolt - Replace the spark plug wire

It is an authentic Toro hardware. The washer-clutch is supplied from the original equipment manufacturer for use on lawn mowers. It helps to engage the pinion gear which is an important component that drives the wheel assembly. If the motor runs but the drive wheel is not spinning, a broken or worn washer-clutch may be the reason. To ensu...Read morere the exact location and the correct application of this item, refer to the appropriate diagrams of your model. Note, one durable plastic washer-clutch is included. You will need a wrench set to remove and resecure the wheel when replacing this hardware.

This is an authentic Toro replacement part manufactured for use with walk-behind lawnmowers. Mower blades eventually wear down from normal use and will require replacement. This special blade is designed for use with mower that use a grass bagging attachment. The blade is sold as an individual replacement part.

An authentic replacement part that is specially manufactured for use with Toro lawn mowers. This is the knob that is secured to the heigh-adjustment arm assembly, for correct location and uses make sure to check appropriate diagrams of your model. Please note this durable plastic part is sold individually.

The Lock Nut is used to secure and lock parts in place. This is a gold, metal, individually sold part which can be installed with a wrench set, and socket set, and attaches onto various locations on a variety of equipment. If broken, damaged or worn, the part may be loose, and there may also be physical damage to the nut, at which time it...Read more should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This is a genuine OEM sourced component which is specially designed for use with Toro lawn and garden equipment. This is a special hardware that is secured on the transmission shaft. It is an identical replacement for a missing or a faulty item that was installed on a new unit, please make sure to refer to the appropriate diagrams of your...Read more model for the correct location and application of this compression spring. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is an authentic replacement part manufactured for use with Murray walk-behind lawnmowers. This special bracket is used to link the stop cable to the stop lever. This bracket is sold as an individual replacement part, please see model diagram for associative parts.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

The flat washer is an OEM replacement part that provides a wide surface area to distribute the load of a bolt or a screw when it is installed. This protects the part being fastened from getting damaged or deformed and provides a more secure fit for the bolt/screw. This flat washer is made of steel and has a diameter of 0.375 inches and a ...Read morethickness of approximately 0.063 inches. To replace the flat washer, first unthread the bolt/screw before using a flathead screwdriver to carefully pry it off. Clean the area, place the new flat washer in position, and thread the bolt/screw back on. Sold individually.