20522287A Frigidaire Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fridge started making a loud racket. Condenser Fan Blade then disintegrated to dust and pieces. The plastic had degraded significantly.
4 of 7 people
found this instruction helpful.
-
Jack from WALLING, TN
- Really Easy
- 15 - 30 mins
-
Nutdriver, Socket set
The repair itself total time was quick and easy. Since the original fan blade blew apart, it was only a matter of putting the new one on in it's place. This can be done by feeding the blade between the cowling and Condenser coil and applying pressure to get it on the shaft.
If your fan is still on the shaft, simply push it off ... Read more and extract it the same way. Then place the new one on the shaft.
In my case, since the part would take a couple days to get, and I had food both in the fridge and the freezer, I removed and unplugged the Condenser Fan Motor and the cowling frame and temporarily spliced a small fan I had into the line for the condenser motor. This kept the fridge working long enough to get the replacement part.
Side note. Direction of airflow is towards the Compressor, and draws air across the Condenser coils.
Hope this helps someone. :)
If your fan is still on the shaft, simply push it off ... Read more and extract it the same way. Then place the new one on the shaft.
In my case, since the part would take a couple days to get, and I had food both in the fridge and the freezer, I removed and unplugged the Condenser Fan Motor and the cowling frame and temporarily spliced a small fan I had into the line for the condenser motor. This kept the fridge working long enough to get the replacement part.
Side note. Direction of airflow is towards the Compressor, and draws air across the Condenser coils.
Hope this helps someone. :)
Read less
Was this helpful?
Thank you for voting!
Wrong Part sent!!!!!
2 of 2 people
found this instruction helpful.
-
ELIZABETH from HENRICO, VA
- Really Easy
- 30 - 60 mins
I did not do a repair. You sent the wrong part & I didn't open the package but I can't get hold of anyone to return the part and get the correct part.
I am very upset that no one will help me. I paid $ 37.28 for the part I ordered and then the wrong part was sent
The sku # on the package is 242010901.This is a rolle ... Read more r type part and I ordered a small wheel.
I can't even find a return address to send it to.. Please help me
Elizabeth Romage
[email protected]
8042627963
I am very upset that no one will help me. I paid $ 37.28 for the part I ordered and then the wrong part was sent
The sku # on the package is 242010901.This is a rolle ... Read more r type part and I ordered a small wheel.
I can't even find a return address to send it to.. Please help me
Elizabeth Romage
[email protected]
8042627963
Read less
Was this helpful?
Thank you for voting!
Previous seal had a tear and cold air was leaking around seal
2 of 2 people
found this instruction helpful.
-
Daniel from Hampton, NH
- A Bit Difficult
- 1- 2 hours
Pulled the old seal out of the groove. Placed new seal in the groove. New seal has to be heated and massaged to get it into proper form so it does not leak. I have been continuously heating and massaging to get the seal to get it in the proper form. Been working on it for a week. Almost there.
Was this helpful?
Thank you for voting!
Thin, flexible edge on outermost door gasket was tearing from the main gasket, likely due to being rubbed when accessing refrigerator..
2 of 2 people
found this instruction helpful.
-
Dennis from Oley, PA
- Really Easy
- Less than 15 mins
Gasket is held in place by an extrusion on the back side. Simply remove the old gasket and press the new gasket's extrusion into the track on the door.
Was this helpful?
Thank you for voting!
The old gaskets were leaking and my refrigerator was losing it cool so I had to take it off-line
2 of 2 people
found this instruction helpful.
-
Ramon from San Antonio, TX
- Really Easy
- Less than 15 mins
Once I call this company, they were able to help me out with what I needed on the gaskets for my refrigerator and everything’s working back to par
Was this helpful?
Thank you for voting!
One blade broke from condenser fan
12 of 32 people
found this instruction helpful.
-
Chris from Lockport, NY
- Really Easy
- Less than 15 mins
The part i recieved, from parts select was a larger in circumfrence (<1/4) than the original. However i was not aware of this until after i treid to repair it.
I removed the broken fan from the condenser. This was very sipmle.
When i pluged the refridgerator back in to the outlet the fan tried to start up but soon be ... Read more gan to make aloud noise, due to there not being enough clerance.
I removed the broken fan from the condenser. This was very sipmle.
When i pluged the refridgerator back in to the outlet the fan tried to start up but soon be ... Read more gan to make aloud noise, due to there not being enough clerance.
Read less
Was this helpful?
Thank you for voting!
GASKET WORN AND LEAKING
2 of 2 people
found this instruction helpful.
-
Dennis from Lancaster, SC
- Very Easy
- Less than 15 mins
SIMPLY REMOVE THE OLD GASKET PULLING LIGHTLY BY HAND
THEN PUSHING THE NEW GASKET BY HAND
THEN PUSHING THE NEW GASKET BY HAND
Was this helpful?
Thank you for voting!
Refrigerator wasn't staying cool enough
2 of 2 people
found this instruction helpful.
-
Karl from Brookfield, CT
- Really Easy
- Less than 15 mins
Easily removed the old gasket and put the new ones on exactly the same way the old ones came off but in reverse
Was this helpful?
Thank you for voting!
Replaced door gaskets with new ones
2 of 2 people
found this instruction helpful.
-
Andres from Golden Valley, MN
- Really Easy
- Less than 15 mins
Removed the old door gaskets by hand and attached the new ones by inserting the edges in the existing grooves
Was this helpful?
Thank you for voting!
ICE WOULDN'T DISPENSE FROM ICE BOX
5 of 12 people
found this instruction helpful.
-
James from ORLANDO, FL
- A Bit Difficult
- 30 - 60 mins
I read other suggestions trying isolate auger motor shaft with pliers while turning bar drive. needle nose pliers could hold the shaft. bar drive just would spin. so took the whole ice box assembly out
(only 2 screws) and with a metal cutting blade used the sawzall to cut along the shaft. freed it up enough to then unscrew it from t ... Read more hat point. Left handed threads by the way.
(only 2 screws) and with a metal cutting blade used the sawzall to cut along the shaft. freed it up enough to then unscrew it from t ... Read more hat point. Left handed threads by the way.
Read less
Was this helpful?
Thank you for voting!
THE GASKET LOCKING INSERT DID NOT FIT THE BOTTOM OF THE DOOR.
2 of 3 people
found this instruction helpful.
-
Robert from Lexington, SC
- A Bit Difficult
- 1- 2 hours
I REMOVED THE OLD GASKET BEING VERY CAREFUL TO SEE EXACTLY HOW IT CAME OFF. I INSERTED THE LOCKING INSERT INTO THE TRACK IN THE DOOR WHICH DID NOT FIT AS THE OLD ONE DID. AFTER USING TREMENDOUS FORCE WITH MULTIPLE TOOLS I DID MANAGE TO GET THE TOP AND THE SIDES TO LOCK INTO PLACE AND EVENTUALLY HOLD. THE BOTTOM OF THE GASKET DID NOT HO
... Read more
LD SO I USED CLEAR CAULK AND TAPE TO HOLD THE GASKET IN UNTIL THE CAULK CURED. AFTER THE CAULK CURED THE GASKET HAS, SO FAR, REMAINED TIGHT.
Read less
Was this helpful?
Thank you for voting!
The drawer was damaged when we purchased the Home, Repairs had been done but the tracts and drawer but were cracked beyond repair
1 person
found this instruction helpful.
-
CURTIS from Nampa, ID
- Very Easy
- Less than 15 mins
-
Screw drivers
The Replacement was very easy and took about 10 minutes including unpackaging.
Was this helpful?
Thank you for voting!
Condensation on freezer door frame
1 person
found this instruction helpful.
-
M. A. from ROCKY HILL, CT
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed the cracked gasket from the French door style freezer compartment and stretched the new gasket around the door frame.
Was this helpful?
Thank you for voting!
Slide assembly broke on left side of freezer drawer.
1 person
found this instruction helpful.
-
Garry from FREE SOIL, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Took front of door off, took out freezer basket removed one screw, took off old part and put on new part, put everything back together and it was done. 15 minutes done.
Was this helpful?
Thank you for voting!
A set scew was ordered twice.
1 of 2 people
found this instruction helpful.
-
Susan from BRAINTREE, VT
- Very Difficult
- 1- 2 hours
The first order arrived in a huge box and there was no scew to be found, the box had wholes in it. I was given a refund and told to order again.
The repair did not happen and the set screw which was actually recieved the second time was returned because it was the wrong size.
The repair did not happen and the set screw which was actually recieved the second time was returned because it was the wrong size.
Was this helpful?
Thank you for voting!