2038 - Parts

This metal ball bearing reduces friction and evenly distributes weight among the rotating parts in your lawn equipment. These bearings can be found in various areas such as the wheels, in pulleys, blades or augers. When the bearing is damaged, you may notice a few things. Your machine may produce rough or grinding noises and excessively p...Read morelay or wobble. The affected part may also become stuck. Immediate replacement is necessary to prevent increased friction, inefficient performance, and potential equipment failure. Removing the bearing depends on your model, so consult your user manual for guidance. You will need to use a screwdriver or pliers to remove the surrounding components around the bearing and a bearing puller, pry bar, or mallet to release the bearing itself from its housing. As ball bearings wear out together, it is advisable to replace all of them at once. Ensure you verify the number of bearings your machine needs before purchasing this OEM replacement part as it is sold individually.

The metal pinion is an authentic Toro part that has been sourced from the original manufacturer to be used with lawnmowers. This item attaches to the transmission axle and interconnects with the drive wheel gear to rotate the wheel in unison with the shaft. The pinion gear is available as an individual replacement part.

The metal blade driver assembly attaches to the blade with the guide belt wrapped around it. The spacer will go inside the driver. This part is used in lawn mowers. If the lawn mower wheels will not turn you may need to replace the blade driver. A wrench will be needed to replace this part if it becomes damaged. The driver is available as an individual replacement item and is an original Toro part.

It is an authentic Toro hardware. The thrust washer is supplied from the original equipment manufacturer for use on lawn mowers. It is utilized to provide a tight fit between connected components of the drive wheel mechanism. Unfortunately, over time the material will tend to wear out and the may get damaged eventually requiring a replace...Read morement. To ensure the exact location and the correct application of this item, refer to the appropriate diagrams of your model. Note, one durable metal thrust washer is included. You will need a wrench set to remove the wheel when replacing this hardware.

This friction ring is an authentic item which is supplied by the original manufacturer for Toro lawn mowers. It is one of the special parts that helps to provide a tight seal between components. Over time it may wear out, get damaged or simply lost eventually requiring a replacement. This high-quality friction ring is made of a durable ma...Read moreterial and is sold as an individual component. Note, you may need a wrench set to remove and resecure the hardware that holds this part. Check the diagrams of your specific model for the exact location and the correct application of this hardware.

This is a genuine replacement part manufactured for use with outdoor power equipment. This flanged hex head screw has several applications, please see model diagram for part use and location. This screw is available as an individual replacement part.

This manufacturer-sourced replacement part is specially designed for use with Toro walk-behind lawn mowers. It helps to distribute the pressure evenly between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please note this high-quality metal conical-washer is sold individually.

It is an authentic Toro hardware. The washer-clutch is supplied from the original equipment manufacturer for use on lawn mowers. It helps to engage the pinion gear which is an important component that drives the wheel assembly. If the motor runs but the drive wheel is not spinning, a broken or worn washer-clutch may be the reason. To ensu...Read morere the exact location and the correct application of this item, refer to the appropriate diagrams of your model. Note, one durable plastic washer-clutch is included. You will need a wrench set to remove and resecure the wheel when replacing this hardware.

It is a genuine manufacturer-sourced item that is specially made for Toro and Lawn Boy lawn mowers. The drive control cable is the cable that stops the blade when the control handle is released. This part provides an identical replacement for a missing or a faulty bail-brake that was installed on a new unit. Please make sure to refer to t...Read morehe appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality bail-brake is made of durable metal and is sold individually.

This genuine replacement part is supplied from original equipment manufacturer. It is a commonly used item on Toro lawn mowers. The purpose of this shoulder bolt is to secure a wheel to the axle. This bolt has a hex head which requires a wrench to secure. Includes one (1) bolt per order.

This is an authentic replacement air filter and prefilter kit which is supplied by the original equipment manufacturer for use with Toro lawn and garden equipment. Its purpose is to filter out dust and debris from contaminating the carburetor and the engine, over time filters will get dirty and clogged eventually requiring replacement to ...Read moreensure the proper air flow. This kit includes one high-quality pleated paper filter and one foam pre-filter.

The button-switch attaches to the housing-switch. This is available as an individual replacement part. This part is an OEM from Toro for use in lawn mowers. A screwdriver might be needed during the installation process. It is made out of plastic and will require replacing if it breaks.