20378 Toro Lawn Mower - Parts

This metal retaining ring otherwise known as a snap ring holds parts in place in your lawn equipment such as blades shafts pulleys or other rotating components to prevent them from sliding off or shifting. A broken ring may be warped cracked or have missing sections. You can tell if it is damaged when the components in your machine are wo...Read morebbly or falling off. To remove a retaining ring you will need a pair of needle-nose pliers or lock/snap ring pliers that fit into the grooves of the ring. By using the pliers to release the tension on the ring you can carefully slide it off the machine. Consult your user manual for instructions on the removal process and to confirm how many rings your machine will need. This replacement part is sold individually and is produced by the original equipment manufacturer so that it precisely fits your machine.

This is a genuine replacement v-belt sourced from original manufacturer and it is used on Toro lawn mowers. This part is made out of rubber and it is sold individually. This is the the belt that is attached to the transmission pulley and it helps to drive the unit. Make sure to clean pulleys before installing the new belt to ensure top...Read more performance and longevity with your new belt. Inspect belt periodically and replace it when worn or stretched to maintain peak performance. To complete this repair you will need a set of wrenches.

This screw is an OEM part sourced directly from the manufacturer and is used in Toro snowthrowers. It requires a wrench and connects the ring-chute to the chute-discharge. The screw is made of metal and is sold as an individual part. Screws will need to be replaced when they become stripped.

This replacement grass bag is used to collect grass clippings that blow from below the mower deck. It is a genuine item that is supplied by original equipment manufacturer for use with Toro lawn mowers. This high quality fabric grass bag is sold individually, please note the metal frame to secure it is sold separately.

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This part has been OEM sourced to ensure a high level of quality. The durable plastic bag anchor is intended to be used with walk-behind lawnmowers from Toro. The bag anchor attaches to the back of the mower's deck assembly. This item is used to secure the grass collection bag and to support the bag's frame. A hex socket wrench or ratchet is needed to install this part and the anchor is sold individually.

This OEM-sourced washer in your walk-behind lawnmower provides space and protects the rear wheel from rubbing against the pivot arm assembly, ensuring smooth wheel rotation. A damaged washer may appear worn or cracked, causing the rear wheel to feel misaligned or wobble excessively. If not replaced, it can lead to increased wear and expen...Read moresive repairs. To remove the existing washer, prop up the wheel with a two by four, use a wrench to remove the bolt securing the wheel, slide out the wheel, and then remove the bolt on the rear adjuster to take off the washer. Please note that this washer is sold individually, so make sure to check the quantity needed for your machine before making your purchase.

This front lower belt cover is designed to protect the mower deck belt from debris, wear, and accidental damage during operation. Made from durable plastic, it helps shield critical belt components to support smooth, reliable performance. It’s a straightforward replacement option for keeping the mower deck properly protected and operating as intended.

The Blade Support is a 6-x-3-inch Black, metal part used to support the blade. It's rated as "Easy" to install by customers. It must be torqued to manufacturer specifications which will require a socket set and wrench set. It attaches to the blade assembly. If there are rattling sounds or other srange sounds coming from the blade area tha...Read moret is a sign the part has been broken or damaged due to wear or fatigue and should be replaced. Refer to your make model, and diagrams to ensure you choose the right part.

This authentic OEM sourced replacement bolt is generally used on Toro lawn mowers. The purpose of this bolt is to secure the cutting blade to the blade driver assembly. This is a hex head bolt which is sold individually. It includes a metal washer. Please note you would need a wrench to replace this blade bolt.

This item is an authentic Toro replacement part that has been OEM sourced to be used with walk-behind lawnmowers. The plastic cable guide attaches to the handle assembly and is used to keep the control cable out of the way by securing it in the middle of the handle. This item is priced as a single part.